Best Down Image for Still Fishing.

very good info. thanks for sharing

Quote:

---

Originally Posted by genec

Vik3,explain more how that humminbird 180 works,can't pic it in my mind,do screen move,like from right to left? To be a hump like pic while setting still and screen move ,can't comprehend,and can you show more pic while setting still? Thanks.

---

I started to use 180 degree Down Imaging scanning for about two years ago with my Humminbird 570 DI:
http://www.crappie.com/crappie/showthread.php/205066-Whats-humminbird-coming-out-with/page9
http://www.crappie.com/crappie/showthread.php/237377-opinion-on-HB-346C-di

http://forums.sideimagingsoft.com/in...p?topic=3403.0

Quote:

---

Originally Posted by vic n

The only reason the boat deck is dark, is because it is tilted away from the sonar. If you go to the other side of the boat and take a pic, the deck should be brighter. The big circle under the boat is the water column just like on si

---

I thought that the depth till bottom is 50ft, but it is 25ft, and this is not a 200ft long ship - this is a big boat 100ft long and 25ft wide. Nevertheless staying still right above the deck just in 19ft of it you will not see any deck details, they will be blinded with 40ft dark spot of water column. It is does not matter if the deck is tilted or not. The same with the depth say 50ft, your hooks will be seen somewhere 50ft aside, and the bottom structure like bushes, stones ets. will not be seen under 100ft dark spot of water column . Bottom structure will be seen only quite aside of the point of still staying. These devices are really not good for vertical fishing.
http://img713.imageshack.us/img713/457/41h4.jpg

Uploaded with ImageShack.us

I think in a "shallow water" application (of water depth less than the boat length)...the 360 can be used effectively for vertical fishing...

There is an offset setting that allows the bow of the boat to be seen on the display to show exactly where the fisherman would be standing while vertical fishing at the bow ...which (in shallow water)...puts the fisherman's bait over the bottom in the 360 image... and not over the "black hole" in the middle...

This is kosmo's image...the 2d confirms that the "blue dot" in the 360 image (which represents the bow of the boat)... is directly over the brush...

I think this offset setting is even adjustable for the user's specific boat length...



Rickie

Quote:

---

Originally Posted by rnvinc

I think in a "shallow water" application (of water depth less than the boat length)...the 360 can be used effectively for vertical fishing...

There is an offset setting that allows the bow of the boat to be seen on the display to show exactly where the fisherman would be standing while vertical fishing at the bow ...which (in shallow water)...puts the fisherman's bait over the bottom in the 360 image... and not over the "black hole" in the middle...

This is kosmo's image...the 2d confirms that the "blue dot" in the 360 image (which represents the bow of the boat)... is directly over the brush...

I think this offset setting is even adjustable for the user's specific boat length...



Rickie

---

rickie,you are correct with all you posted.i have a 21ft. boat with transom mount 360 with the offset set to 21ft. I was vertical fisbing.those lines going to tbe surface on the 2d was my jig being picked up and dropped.i not sure if i could do that with a bow mounted 360.seems to me that the water column issue that vik3 mentioned would prevent me from having the structure,my jig and 2d showing at the same time along with the 360

Quote:

---

Originally Posted by kosmo

rickie,you are correct with all you posted.i have a 21ft. boat with transom mount 360 with the offset set to 21ft. I was vertical fisbing.those lines going to tbe surface on the 2d was my jig being picked up and dropped.i not sure if i could do that with a bow mounted 360.seems to me that the water column issue that vik3 mentioned would prevent me from having the structure,my jig and 2d showing at the same time along with the 360

---

Wouldnt it be better to add the length that your rod sticks out over the front of the boat, that is 12 foot rod 10ft sticks out over bow so make offset 31 feet? That way you would have you bait right over the brush pile instead the bow of the boat.

Rickie/Kosmo can you turn contour mode on or off on the 360? Would that help see you jig and fish, brush? Ie when your sitting in top of it?

http://i826.photobucket.com/albums/z...psvyewn95b.pngin the area that i circled,that white line is the bottom of my trolling motor.it took me awhile before i noticed it showing up on my shots

Quote:

---

Originally Posted by Redge

Rickie/Kosmo can you turn contour mode on or off on the 360? Would that help see you jig and fish, brush? Ie when your sitting in top of it?

---

your correct that the water column can be removed. I have never tryed to see my jig on the 360.im not sure if somethi.g as small as my jig can be seen.i always use the 2d to watch my jig

Quote:

---

Originally Posted by Redge

Rickie/Kosmo can you turn contour mode on or off on the 360? Would that help see you jig and fish, brush? Ie when your sitting in top of it?

---

this is a stump thats under my boat.ive got tbe water column removed..

http://i826.photobucket.com/albums/z...psf952e892.png