I have a boat, don't feel sorry for me

Printable View

Show 40 post(s) from this thread on one page

06-06-2009, 09:24 PM
rugsrme

2 Attachment(s)

I have a boat, don't feel sorry for me

I wanted to share a project I am staring to work on.
I have had this boat for about 3 years and it has sat in this spot since the day I bought it.
The motor ran when I first bought it but I ran it out of gas and the carb was acting up.
Well, after getting out on the water with some of you who were gracious enough to put me on the fish, I decided to get off my lazy butt and get this boat in the water.
Today, I tackled the carb problem and got the motor running really good. It is a 1960 Sea King 35 hp.
The boat is a 1960 Lonestar it looks cool with the Tail Fins!
Here is my to-do list, if any of you have any suggestions I'm ready for them:

New battery completed
Need 14" wheel for trailer spare completed and mounted
Mount 2 tires completed
Replace lights on trailer completed
Re-wire starter,operating lights lights work, but couldn't figure out the button on the dash for starter
Re cable the steering system completed
Pack bearings in trailer wheels completed
Replace oil in the "lower unit" completed
Register and transfer title completed
Inspect resister trailer completed
Replace connector from fuel line to gas tank completed
Replaced motor bushings/mounts completed
Get a couple of oars gottem
Acquire MO CDC decals for motor recived 6-17-09, waiting to paint before I put it on
Trolling motor Fixed up the old Min Kota 85
Carpet (don't know who will do that for me for a good price :)) Found a good piece of outdoor carpet for $35
Replace cables for throttle and shifter levers Have to replace the control boxes, they are too worn to push the cables
Paint I got some really cool Denver Bronco Blue !!, Got the orange paint today, just need the time.
Seat cushions or upholstery This can wait for now but will do when everything priority is done.
Fish finder pending meeting up with Bob

I'll keep this updated as I go along, and soon you will see "The Rug Rat" on a lake near you!
See ya on the water,
Quinn
06-06-2009, 10:15 PM
rlsiv

Cool looking ole boat, Rugs. Those fins make it look like a caddy :)
Carpet isn't very hard at all - let me know if you need some pointers on it.
06-06-2009, 10:21 PM
rugsrme

Quote:

Originally Posted by rlsiv

Cool looking ole boat, Rugs. Those fins make it look like a caddy :)
Carpet isn't very hard at all - let me know if you need some pointers on it.

I got the carpet under control (22 years on my knees):)
I may need some pointers on the wiring if I run into problems.
06-07-2009, 08:14 AM
FROSTY

Looks like a FINE fishing machine to me! Bet she would ride pretty smooth. Were you going to try and mount a trolling motor? Hope you can save the horn.
06-07-2009, 08:22 AM
olesilverside

Way To Go Rugs

I Can Just See A Diamond Plate Deck. Think U Might Have It Ready By This Next Weekend...... Crappie Are Biting..:)
06-07-2009, 08:32 AM
DMW1960

My First Boat Was Worse Looking Than What You Have And I Sure Didn't Have A Cool Looking Horn Like You Have. I Had To Get One Of Those Canned Air Horns.
06-07-2009, 10:41 AM
olesilverside

Save That Horn

And Everytime U Catch A 13" Plus Crappie, Let Her Go...... Wish I Had One, All I Do I Yell Hot Dam...........:)
06-07-2009, 01:18 PM
DMW1960

Quote:

Originally Posted by olesilverside

And Everytime U Catch A 13" Plus Crappie, Let Her Go...... Wish I Had One, All I Do I Yell Hot Dam...........:)

YEP AND POOR RON ALL YOU DO IS PICK ON HIM!
06-07-2009, 01:21 PM
rugsrme

Quote:

Originally Posted by FROSTY

Looks like a FINE fishing machine to me! Bet she would ride pretty smooth. Were you going to try and mount a trolling motor? Hope you can save the horn.

My wifes boss has one with the foot control and stuff, I am going to check it out and see if there is a way to mount it on the front with that closed in front.
He said the wires are "messed up" I may need to consult with someone familiar with the unit to see if it is fixable for a reasonable price.
If I have to I'll move the horn, it is pretty cool
By the way, the boat and motor are 1960 !!
06-07-2009, 07:34 PM
bwillaub

WTH would feel sorry for you?? That's a classic. LOts of fish to be caught from that boat.
06-07-2009, 09:06 PM
rugsrme

Quote:

Originally Posted by bwillaub

WTH would feel sorry for you?? That's a classic. LOts of fish to be caught from that boat.

I really meant: don't feel sorry for me cause I don't have a boat. I envy you guys with boats and I have had this boat just sitting here.
It is ready to hit the water as soon as I get it registered.
I still need the cables for the throttle and shifter but for now I am going to unhook the steering cables from the motor and drive it like a tiller. That way I can run it around a little and see how much money I want to put into it from here.
The motor has been starting up great, it idles good and it seems like it will really push that boat around :cool:
Not bad for a 49 nine year old boat and motor.
Quinn
06-08-2009, 10:12 AM
crappiehawg

Rugs--Some stuff about wheel bearings here if you've never done it before--I tore apart both hubs and replaced bearings, races, and seals back in February or March.

Wheel Bearing Repacking Or Replacement

Also, there are great videos on YouTube.com that will show you in detail how to change lower unit oil. Probably some on there for trailer bearings too, now that I think about it. Just do a search and poke around til you find what you're looking for.
06-08-2009, 03:25 PM
rugsrme

Quote:

Originally Posted by crappiehawg

Rugs--Some stuff about wheel bearings here if you've never done it before--I tore apart both hubs and replaced bearings, races, and seals back in February or March.

Wheel Bearing Repacking Or Replacement

Also, there are great videos on YouTube.com that will show you in detail how to change lower unit oil. Probably some on there for trailer bearings too, now that I think about it. Just do a search and poke around til you find what you're looking for.

Thanks for the link, I wish I had that before I replaced bearings in a van years ago!, it was a nice refresher course.
Also, I learned something about those bearing buddies, I thought they would be pretty helpful but I can see where they would lead to a failure.
Quinn
06-08-2009, 04:00 PM
crappiehawg

Yeah, gotta watch the bearing buddies. I had blown out my grease seals because I was pumping too much in there, so when I went to replace those, I just replaced the whole mess.
06-08-2009, 06:36 PM
rugsrme

1 Attachment(s)

Registerd !

Boat is registered :cool:
If I have the cash, I'm going to get the trailer inspected and licensed then I am putting it in a lake sometime this week, Can't wait !!!
06-08-2009, 07:04 PM
beagle man

that boat look just like the one my daddy built many years ago, darn fine boat, hope you keep it up, good luck on your endevor,
06-08-2009, 07:22 PM
rugsrme

1 Attachment(s)

Quote:

Originally Posted by beagle man

that boat look just like the one my daddy built many years ago, darn fine boat, hope you keep it up, good luck on your endeavor,

Thanks Beagle you'll see me around Bucksaw with it soon.
I got the name put on it, it is temporary with a Sharpie because if it works out I'm going to paint it and do it up really nice.
06-09-2009, 11:47 AM
gatorbitu

Nice work rugs, you are moving right along with your project. You will have a lot of pride in that when you are done.
06-09-2009, 08:47 PM
Jigging15

THE RUG RAT I like it Quinn. Can't wait to see it on the lake with you swinging a fish into it.
06-10-2009, 11:21 AM
centerdriver

Just noticed that it is an aluminum boat. I thought it was an ol wood boat. Saw some that have been restored (wood and metal) and they are sure sharp. Real attention getter.
Dusty
06-10-2009, 12:02 PM
Kit Papermouth

I just got to thinkin'

If you have someone fishing too close.
Everytime you catch a keeper, light off that horn and see how long it takes for them to move.

Also, with an old rivet boat like that. Keep some tubes of JB Weld on hand at all times.
A little advise from your Uncle Kit.

G.
06-10-2009, 12:23 PM
bwillaub

Quote:

Originally Posted by Kit Papermouth

Also, with an old rivet boat like that. Keep some tubes of JB Weld on hand at all times.
A little advise from your Uncle Kit.

G.

Nahhhhhhhh. Just install a bilge pump. The leaks are part of the nostalgia. I'm looking forward to my first ride in it. Should I bring my own pail?:D
06-10-2009, 04:59 PM
rlsiv

Heck, Quinn, you're buzzing through that makeover list! Gonna be on the water in no time.
Can't wait to see it! :)
06-10-2009, 07:06 PM
Buckwheat 1

Rugs-Just an idea to put on the transomWhat happens at Bucksaw ,stays at Bucksaw
06-10-2009, 08:24 PM
rugsrme

Quote:

Originally Posted by rlsiv

Heck, Quinn, you're buzzing through that makeover list! Gonna be on the water in no time.
Can't wait to see it! :)

I stopped at Maple Leaf lake on the way home from Lees Summit getting the inspection and floated it at the ramp to see if it leaks and run the motor a little. Going to register the trailer tomorrow and if I have time its going in the lake for a spin:cool::)
I really want to take it to Smithville this weekend if I have any money left to get there, I may have to miss the Mini-camp:(

Quote:

Originally Posted by Buckwheat 1

Rugs-Just an idea to put on the transomWhat happens at Bucksaw ,stays at Bucksaw

I'll take that into consideration Buckwheat:D
06-10-2009, 08:30 PM
rugsrme

Quote:

Originally Posted by bwillaub

Nahhhhhhhh. Just install a bilge pump. The leaks are part of the nostalgia. I'm looking forward to my first ride in it. Should I bring my own pail?:D

Yea, they are cheap at Wal-Mart, but absolutely your going to ride in it my friend !! and you will want that bucket handy as a backup cause I'm not sure if that motor will keep the battery charged, I am not really familiar with these old motors, I don't think it will.
Anyone else is welcome in the "Front" seat of my boat until I get the cables all worked out and have the steering hooked up, then ya all are goin' in the back:D
Anyone brave enough to go along tomorrow, shoot me a PM for my ph# unless you already have it.
Q
06-10-2009, 08:57 PM
Jigging15

Dam you could sell tickets for a ride in it. I would like to go for a spin in it also. Can't wait till you get it out and about.
06-10-2009, 09:08 PM
rugsrme

Quote:

Originally Posted by Jigging15

Dam you could sell tickets for a ride in it. I would like to go for a spin in it also. Can't wait till you get it out and about.

hmmmmmmmmmmmmm
06-10-2009, 09:16 PM
Bo Bryant

Looks Familiar

That boat looks familiar. My brother had one like it when I was younger. We caught many crappie, bream out of her. Even did some water skiing behind her.

Don't feel sorry for you, am happy for you!

Bo Bryant
06-11-2009, 12:54 PM
rugsrme

1 Attachment(s)

Trailer registered!! I'm legal to hit the water!!

Got the trailer registered today, now everything is legal.
Going to Maple Leaf when the wife gets home !!!
I'll let ya all know if it will float!!
06-11-2009, 01:39 PM
bugman

I bet that ole girl has many more limits left in her.........have fun guys and good luck.
06-11-2009, 10:05 PM
rugsrme

Rug Rat maiden voyage Good news/Bad news

Well, it was fun to take my boat out for the first time. It floats, the motor run pretty good, thats the good news.
The bad news is my "to-do" list got longer. The motor needs the bushings that mount the top to the bottom of the motor together, it shakes terribly, I didn't notice it when I was running it in the yard with the cover off, but it is so sloppy the insides clack against the cover:(
My repair job didn't work with the cables, so I need to replace them so I can drive it from the front. It worked ok by using it like a tiller motor, but it is a real PITA:mad:
Also, there is oil coming from 3 holes in the bottom of the upper part of the motor that look like they should have bolts in them. I assume the oil is coming from the exhaust some how:confused::confused:
All in all it is going to be ok, I am staying home this weekend to get some of these things fixed and maybe get that beautiful dark blue paint on it. And of course, all the trim and lettering is going to be in that bold redish orange:cool:
Oh yea, I didn't catch any fish "Slayer !! I need some advice on Maple Leaf please!!"
Quinn
06-12-2009, 05:10 PM
rlsiv

Rugs, at least your maiden voyage was better than the Titanic.
All that stuff sounds fixable, and end you have something you did yourself that you'll be proud of.
06-15-2009, 08:55 AM
rugsrme

2 Attachment(s)

Manual trolling motor and depth finder installed

Ok, now I have my manual trolling motor and depth finder installed. Allot of the MDC lakes here are "Electric only", I suppose a manual type would be ok as long as it isn't gasoline powered:cool:
This anchor came with the boat! Score!! what a deal I got !! I did have to buy the rope:D
06-15-2009, 09:22 AM
olesilverside

Good Luck On The Trolling Motor

We Had One Of Them Back In The 50's.......... They Sure Suck On A Windy Day........... Course U Are A Little Windy Yourself..........:) I Can Always Tell When U R Talking In Marshall We Get A Northern Here In Windsor..........:)
06-15-2009, 09:22 AM
bwillaub

Gettin better all the time.
06-15-2009, 04:39 PM
KCMO CRAPPIESLAYER

[QUOTE=
Oh yea, I didn't catch any fish "Slayer !! I need some advice on Maple Leaf please!!"
Quinn[/QUOTE]

i'm a sorry, it's tuff i tell ya, well for some;), i'm by far not trying to sound cocky, but on that lake inparticular. i have found that the more successful fishing trip's have been when i fish hard, hard, hard. and what i mean by that is if i'm on that lake i'm not lollygagging around doing anything else but trying to find crappie. i notice i don't munch on food much, may have one coke, don't smoke as much, it's weird i know but i devote all my energy and time trying to figure the pattern out that particular day. and i fish that lake a lot by myself, i find it's much easier as only one person can get hung up at a time, and you gotta be VERY stealthlike with the trolling motor. those fish seem to spook so so easy at anytime. i don't know what it is but maple leaf crappie just seem to have different habit's than most crappie. i have talked to the conservation agent out there and he has been fishing it since it opened and he has "concurred" on the theory's i just stated;). heck i dont know, but i will this week i hope:D
06-15-2009, 05:32 PM
rugsrme

Thats true with the wind !!

Quote:

Originally Posted by olesilverside

We Had One Of Them Back In The 50's.......... They Sure Suck On A Windy Day........... Course U Are A Little Windy Yourself..........:) I Can Always Tell When U R Talking In Marshall We Get A Northern Here In Windsor..........:)

Yea their tough in the wind. I paddled sideways until I got to a spot I wanted to try, got anchored, cast a few times then you know what happened next, Kaboommmm rumble rumble rumble.... I didn't see the lightning, but I wasn't taking any chances, so I pulled the anchor and the wind was blowing cross ways from where the "ramp" (its a gravel hill shallow enough slope to put in), so I drifted and paddled to the handicap accessible dock to wait it out. It wasn't bad fishing on a covered dock until the school bus unloaded 20 middle schoolers and the teacher and they invaded the dock:eek::eek:
The electric trolling motor is coming soon, can't be sooner for me :D
Sorry so winded, Quinn
06-17-2009, 12:33 AM
gatorbitu

All in all it is going to be ok, I am staying home this weekend to get some of these things fixed and maybe get that beautiful dark blue paint on it. And of course, all the trim and lettering is going to be in that bold redish orange:cool:

Rugs...you ever consider a color more like Cowboys Blue or maybe even Gator colors?:D Sure would look nice on that boat!:eek:
06-17-2009, 06:01 AM
rugsrme

Quote:

Originally Posted by gatorbitu

Rugs...you ever consider a color more like Cowboys Blue or maybe even Gator colors?:D Sure would look nice on that boat!:eek:

Cowboys Blue?? NO NO NO NO!
Gator colors? If I hadn't bought the other new Broncos colors, I would consider them colors, I saw a guy wearing what I thought was an Old school Broncos hat and when he turned I saw it was a Florida Gators hat, similar colors.
You know how many Chiefs fans that are going to be floating around Truman and LOZ are going to see that boat and gona have to admit "That does look pretty cool :confused:" (Yea, even Bugman !)
Thanks anyway for the suggestions though.
Q
PS I did consider in honor of getting Bwilaub's feathers ruffled, a nice crimson would look good "rolling the tides of Truman !"

Show 40 post(s) from this thread on one page