Printable View
These are some pics of one of the racks I use for curing jigs. Pans are from the swap meet and my hanging rods are 6x10-32 screws. You can put alot of jigs in these pans. The notch on the side allows you to remove or load the pan without disturbing jigs already placed in the pan.
Attachment 23142
Attachment 23143
That is a very neat idea. Thanks.
Kinda looks like my breadpan except you use bars and I poke holes all around the top, man I need to get my camera back from my kid. Great ideas all around
Fatman
I really like that idea! Now I need to just come up with something like that for my little oven. I don't like placing them directly onto the oven's racks. They slide around too much.
Maybe I can weld some rod with some all thread?.....hmmm......
AH
They have different size bread pans - have some that are smaller.
Looks good
I use a turkey holder can adjust the angle has about 6 or 7 rows on each side and i just put a pan under neath it...
Thanks for a good idea, ledhed
I like the notch ...
Now why didnt you let me know about that before now ? :)
Thanx
JSC
Wonder if a pan that size or close would be at the dollar store?
Can't take full credit for this idea - read about the cake pan on another site - the screws and notches were my contribution.
JSC
Thought you had that one. It's a real step up from my old beat up rack. Was doing 4 colors on 1/32 heads.
NP64
You can find cake pans anywhere - thrift stores would be the best bet. I came across 2 large (as Pictured) and 4 smaller ones (about half the size) for $3 at a swap meet.
FM
Thought I had seen a pic of your set up somewhere....