Printable View
Bit the bullet today and bought one... In two hours I had it installed and ready to go.. It's going to be hard to focus at work tomorrow.. I ordered a navionice platinum card too.. Like they say, you can't put a price on a good time!!!!! Thats what I keep telling myself anyway..:)
Quote:
Originally Posted by JusFshn
You get on the water and get aggravated at that thing, the fun will end. Just put it in a box and send it to me. I need one for my Jon boat.:)
They are nice.
The 1197 adds a whole new meaning to 3g.. Or do I mean 3k!!:eek: It was tuff to decide wether I wanted to sleep or go to the lake and mark a few waypoints last night.. Who needs sleep when you got a 1197c si!! If its okay with you I may be asking some questions later.. The 1197 makes my Tracker PT175 look like a jon boat.. I'm going to have to shift the batteries around in the boat to keep the boat from leaning to the port side..:) That Hummingbird is a hoss!!! Puts off some serious heat too! Your gonna laugh.. I spent two hours to figure out how to get the time/date to show on the interface and struck out.. Who knows???
I don't have a 1197, I have the 997. I know what all the buttons are about.Quote:
Originally Posted by JusFshn
Get a power cable and a 12v battery. Take it inside and play with it. Some folks are using their drill motor batteries ( 14-18v).
I fiddle with this kinda stuff alot.:) Not an expert by any means.
Meant to ask..Where you mount the 1197?
Also meant to add. You could get 4-5 hdtv for that kinda loot.
To get the time and date on the screen you will need to turn the unit on and when it boots up press the menu button twice. Then go over to the Setup Tab. Then go down and see of the user mode is set to the advanced mode. If it is set into the advanced mode go on down to where it says Select Readouts. Press your right cursor button when Selects Readouts is highlighted. It will then give you readout options. Here you can get what you are looking for. If you have anymore questions let me know.
Joby
Humminbird
the bahemouth is mountend on the the console with a ram mount... I am a little woried about where I have the transducer mounted.. didn't want to drill any extra holes in the hull if I didn't have too.. Hope the foot of the motor doesn't interfere with the si.. Of course I will drill new holes if neccesary.. Looks like it should be far enough away though..
The drill motor batt. is a good idea.. That will come later once I start recording and playing with waypoints on the pc.. Don't have a lap top wich would be easier..
Thx!!!!!!!!!!!!!!!!! Thx alot..Quote:
Originally Posted by Joby @ Humminbird
Yeah thx for reminding me... I still have an analog tv.. At least I have my priorities in the right spot... I dont' know If up til' 4am because I was excited about the new toy or if I was having buyers remorse.. I'm still have a lump in my stomach but I'm sure it will subside in a week or two...:)Quote:
Originally Posted by Cane Pole
I mean't to say move batteries to the port side.. Now I know why you were curious on where I mounted the unit..
When I hit a wave real hard, my console really flexes. That cup holder hole is in the way. I need to stiffen this area up. Keep an eye on this. I have a Tracker PC 175.
Thats good advice.. Only put three screws in the Ram ball mount.. Think I will put the fourth one in for good measure.Quote:
Originally Posted by Cane Pole
That were she got mounted.... Still needs that extra screw in the base mount
http://i255.photobucket.com/albums/h...KEEBLE/004.jpg
Ain't she purdy...........
Just picked up the Navionics Platinum card... The 3D and aeriel photos on this card are SUPER COOL!! Can't wait until tomrrow around 6pm or so to put the 1197 on its maiden voyage....
You should really look at the RAM 109-H. I have one on a 997 and it is sturdy as a rock. Loosen the handle and it will turn any direction. I'll try to post a pic here.
Buzz
of a small portion of Brookville Lake in Indiana.. This image was taken while I was piddling with the navionics card... Cool stuff!
http://i255.photobucket.com/albums/h...BLE/S00003.png
This one works pretty well......Quote:
Originally Posted by Buzz
http://i255.photobucket.com/albums/h...KEEBLE/001.jpg
I would just keep an eye on it while you are running the boat. I had that same exact mount on my 997 before I bought the 109 and I could never get it to stay in the same place. Also, the ball joints kinda worried me. Hopefully yours will work better than mine did.
Buzz
For the heads up.... Seem to be happy with it after using it last evening for the first time.. The only problem is that I am looking at bottom cover/structure with the 1197 than actually fishing..:eek:
i got the 1197, what do i need to do so i can bring it inside etc and play with it, would like to be able to look at the gps platinum map etc while layed up in the recliner lol
Power cord
Power source
Gps antenna