Transfering Humminbird Waypoints (HELP)

I have a HB 787 and a HB 797 and I can't figure out how to transfer the waypoints from the units to my PC or my Garmin 76CSX. I just purchased Navionics Hot Maps Explorer. I already have Garmins Map Source, Free edition of Easy GPS, Delorme Topo USA. and Free Google Earth. I hope I don't have to purchase another gadget to load these. I do not have a problem loading waypoints to the units but I would like to see where I've been when I return home after fishing all day. It is a pain in the ash seating in the boat in 100 degree temperature trying to plot your next trip out. I have Navionics maps on the units and the Navionics Explorer on the PC and I am real happy so far. So if anyone out there could help explain how to load these waypoints it would be deeply appreciated.

Your HB's have SD cards they should transfer to card from unit. Take sd to pc and upload them.

I would use Garmin Mapsource. It is easy. You get data direct from gps via cable to pc.

If you don't know how to do this, let me know. I will help.

Humminbird is a pain in the tailpipe wit it's Humminbird PC program.

Cane Pole any help that you could give would be appreciated.
Can I transfer the waypoints from the SD card to Map Source or do I have to have the actual unit removed from the boat?

0n Humingbird unit got to NAV tab ,scrowl down to export all nav data tab over . YES (transfers data to sd card)

Remove SD card and plug it into your PC. Open Humminbird PC program.

Click manage waypoints, tracks, etc

Click transfer (from sd)

Click "file" (top task bar)

Click "save as" or "export"

type in a file name (in title window)

"save in" my documents

This saves as gpx file and is saved in My Documents by the file name you give it..

Do this first.



Don't want to confuse you with too many instruction.

We will then go from the saved GPX. It not too hard.

Write the above directions down.

If I make a mistake with this, someone here will correct me.

I have them saved in my documents. Ready for next step!

Quote:

---

Originally Posted by Charlie K.

I have them saved in my documents. Ready for next step!

---

Save you stuff on the Garmin then delete all data on it.


We want a clean unit.


After clearing Garmin, hook up garmin to PC.

Open Easy GPS program and put that saved GPX file on the garmin.

This gets the HB data to the Garmin.

Open mapsource,then get the data from the Garmin. Now you can see where U been in the Garmin Mapsource Maps.

I am not familiar with Lowrance stuff or Navinics Map stuff.

Did I over simplify the how to directions Charlie? If so, Let me know.

Thanks Cane Pole. I think everything is going to work out OK. I now have a problem with duplicate way points. All of the way points I loaded onto the sd card from my HB are in triplicate. I have to figure out how to delete way points with the same coordinates. They all have different numbers (similar) but are in triple.

Quote:

---

Originally Posted by Charlie K.

Thanks Cane Pole. I think everything is going to work out OK. I now have a problem with duplicate way points. All of the way points I loaded onto the sd card from my HB are in triplicate. I have to figure out how to delete way points with the same coordinates. They all have different numbers (similar) but are in triple.

---

You can edit waypoints in mapsourse or easygps.

Glad to help.

That double, triple stuff is why I always flush my gps. I been there.:mad:

I have over 300 way points on my HB. Do you know of a way on map source or easy to delete duplicate points or do I have to do them 1 at a time. I have a back up copy of my main points but I have a few new ones that I did not copy. I think it would be easier just to load my back up on one unit and go back over the new spots with the bow unit and mark the new points again.
Thanks for your help.
Charlie

Quote:

---

Originally Posted by Charlie K.

I have over 300 way points on my HB. Do you know of a way on map source or easy to delete duplicate points or do I have to do them 1 at a time. I have a back up copy of my main points but I have a few new ones that I did not copy. I think it would be easier just to load my back up on one unit and go back over the new spots with the bow unit and mark the new points again.
Thanks for your help.
Charlie

---

1 at a time. sux. I usually print mine first, then pencil edit,then change from pencil sheet. Easier.

Overall, I got 3-4 thousand. I am very careful.

Mr. Cane Pole,if you have the time I have a question for you. I have a 797and the sd card in it is the nav. maps, I didn't get the pre loaded maps. is there a way to do what ya'll have been chatting about so I can move my waypoints /brush pile locations from garmin hot maps to the HB? thank you in advance. beagle man

All waypoints are stowed in the units memory.

Get a blank sd card. Install blank and then power unit up. Hit menu twice, then arrow over to NAV tab. Arrow down to export all Nav Data. Arrow over Yes to confirm. This puts the waypoints on the spare (blank) sd card. You can now review and manipulate the waypoints, tracks by using the Humminbird PC program.

I am doing this from memory. I believe this to be correct. Sometimes I have "senior moments".:(

Quote:

---

Originally Posted by Cane Pole

All waypoints are stowed in the units memory.

Get a blank sd card. Install blank and then power unit up. Hit menu twice, then arrow over to NAV tab. Arrow down to export all Nav Data. Arrow over Yes to confirm. This puts the waypoints on the spare (blank) sd card. You can now review and manipulate the waypoints, tracks by using the Humminbird PC program.

I am doing this from memory. I believe this to be correct. Sometimes I have "senior moments".:(

---

this humminbird PC program is it in the unit or do I need to contact humminbird and get one thanks

Quote:

---

Originally Posted by beagle man

this humminbird PC program is it in the unit or do I need to contact humminbird and get one thanks

---

It is a HB management program for the Humminbird units you install on your PC. You need to download it from their website. You can get it on the same page as the unit upgrades. Just login to your account. Gotta register your unit. I don't like this registering part. But you gotta if you want updates, etc.

Thank you Cane Pole, will get on it