Printable View
I have had about the last 20 jigs or whip finish come untied, I have been using this tool religiously for about 20 years so I know how to use it, I usually rotate it about 5 times before I turn loose of it, don’t know if it’s the thread or I didn’t get it tight enough or what, anybody ever had this to happen?
Could be thread. I whip 5 and then whip another 3. I then pull to the point of the thread breaking. Know of some that pull until thread breaks off.
Are you using a glue or lacquer to hold thread? Might help keep from unwrapping if not.
superdave I have hardly ever used any lacquer or glue to hold my thread, this is the only time I have ever had this problem, I have a new bobbin that is not as tight as my old ones, and I think that’s the problem, but not sure.Quote:
Originally Posted by SuperDave336
I don't know what thread your using. I use Danville 210 Denier Flat waxed Nylon. Works great!
I been using the same for 20 years and no problems, this is the only time.Quote:
Originally Posted by slammingjack
I whip 5 times then another 4....never had any come loose.
Touch of glue never hurts to ensure a good tie,,,
this is the first time I have ever had any to come loose. Back in the day all we did was put half hitches in them, never had one of those come loose either. Don’t know what was happening, used some of the jigs today catching 25-30 crappie off one jig and no problems.Quote:
Originally Posted by ksnouf
I like a little glue myself. It certainly locks everything in place
Try a new spool of thread, or a new bobbin. Other than that, with your experience, good luck. I agree with you, glue isn't required, unless you're selling jigs. ⁹
Hmmm I've never had that happen, it sounds like you know what you're doing with the tool.
I usually do 4 turns and pull tight but I do always apply head cement the thread and let it really soak in.
I use a touch of glue to lock everything down. I have never had one come apart while crappie fishing but white bass can be hard on a jig. A dab of glue is cheap insurance.
Never used a whip and never had a problem. I always coated the thread with Sally Hansens super clear finger nail polish. Works great and a lot simpler and faster than a whip.