Printable View
I have finally decided to start using UV resin to start coating my jig heads, what brand and consistency would everyone recommend? I will be using an UV light and/or sunlight to cure. Thanks for all the help!
Flymoron
Sent from my iPad using Crappie.com
Solarez Diamond is best I’ve found. I get it off Amazon. Make sure it’s the daikons as the other stuff is brittle or be tacky to the touch.
If you want to coat the whole outside of jig heads as a clear coat, you will need to make a UV curing box and dip resin like you would a crankbait. You will not get a nice even coat with drops and a flashlight.
If you are coating thread wraps, solarez thin is what I like but you will need a good flashlight. If you are going to use the sun, i would think you still need to set with a flashlight to keep it from running first.
Sent from my SM-A516U using Crappie.com mobile app
I just use a cheap model brush to paint UV resin on. I paint about 12 and then zap with a 50watt UV light I got off Amazon. I then place in a jig holder in the sunlight. If no sunlight then I have a make shift UV
drying box with the 50watt light.
Here is a thread I have demonstrating a lot of jig heads I’ve applied UV with a cheap model brush.
https://www.crappie.com/crappie/jig-...ghts-jigheads/
Reading the bottle of the Solarez Diamond it says will only yellow if overexposed with UV light. Have you had any issues with yellowing?
No I haven’t and I’ve left out in sun 2-3 hours. I would imagine if you left out in sun for days on a rod in a boat maybe.
Now if I was applying to more than just a jighead like a crank bait I would dip.
I would recommend getting a small bottle and see if you like 1st.
if just wanting to apply eyes then use BSI 30 minute 2 part epoxy. Eyes will never come off and doesn’t yellow.
if you are looking for an extra layer of depth then use epoxy.
I have the Solarez torch and wouldn’t think it would yellow it unless left for a very long time. It’s a pretty powerful UV light.
What is BSI?Quote:
Originally Posted by DrNip
Thanks
Sent from my iPad using Crappie.com
Bob Smith IndustriesQuote:
Originally Posted by flymoron
Amazon.com
It’s a 2 part epoxy resin that you mix 50/50. What I use to glue my eyes on. I simply mix a pea size of each and take the back of a paint brush to dap on each jig then apply the eye. Very simple process.Quote:
Originally Posted by flymoron
If you want to brighten up your jigs try adding Pro tec UV Blast to your powder paint and it will brighten up your jigs. I use it in all my powder paints, even black has a uv "glow" to it. UV Blast really works.
Andy,,,please just be extra careful with this stuff as I found out…I am still dealing with a few serious skin burns from using it,,m,if you ever get messy with this stuff and it gets on your hands and you rub your face or legs, it will burn you…without you ever knowing it,,,,so safety, safety, safety using strange chemicals like these…
I've been using this resin with good results:
Amazon.com
Also ordered some small black bottles with brush for storing a usable amount and applying to jigs.
Amazon.com
Rezzzz,,which resin do you use? I used the Bonedry solarez
Mr. Resin is what I've been using.Quote:
Originally Posted by Takeum
Got a big bottle and transfered it to the small bottle with the brush.
See above links.
Also, forgot about the fingernail lamp that's handy:
Attachment 463601
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Now that’s cool
Hobby Lobby it's inexpensive and it works.
UV Resin | Hobby Lobby | 2088136
UV Resin | Hobby Lobby | 2088136