ISO Screw in knob for Helix 5

Guys/Gals, I lost ONE of the screw in knobs that connects my Helix 5 to the mount and I can't find anywhere that sells just the knobs. Everyone sells them with the mount. Do any of you have any extra knobs laying around that you could part with? I only need one! Thanks in advance!

Here is a link to the Hummingbird Store. They say they are in stockhttps://humminbird.johnsonoutdoors.com/accessories/mounts-hardware/mounting-knobs-helix-5-7

Humminbird Helix 5/7 Gimbal Mounting Knob set of 2 - Mikes Reel Repair Ltd here is another place that has them

And here ...

Mounting Knobs for Helix 5 & 7 – PTG Electronics

Rickie

Guys, thanks for all the sites but it looks like the shipping is almost as expensive as the product. If any of you have an extra laying around that you are not using, I would rather pay you and the shipping. Thanks again.

I have a pair. Been my experience with other things I have shipped or had shipped it's going to cost the same or more.

Sent from my SM-G975U using Crappie.com Fishing mobile app

Quote:

---

Originally Posted by catchNgrease

I have a pair. Been my experience with other things I have shipped or had shipped it's going to cost the same or more.

Sent from my SM-G975U using Crappie.com Fishing mobile app

---

Sent you a PM.

Shadow, check ACE hardware or any good hardware store. Bring the one you have with you for size check.

Lowes or tractor supply or Home depot. standard 1/4 20 thread is common on most head units I use.

They should have something for sure

Quote:

---

Originally Posted by Cane Pole

Lowes or tractor supply or Home depot. standard 1/4 20 thread is common on most head units I use.

---

I tried to measure using my die set but the engraving was gone. My best guess is size 12 24 thread

Sent from my SM-G975U using Crappie.com Fishing mobile app

Quote:

---

Originally Posted by catchNgrease

I tried to measure using my die set but the engraving was gone. My best guess is size 12 24 thread

Sent from my SM-G975U using Crappie.com Fishing mobile app

---

Tractor supply has two three winged knobs as well as 4, 5, & 6 point star knobs. In most thread sizes. Even blank knobs you add a bolt or nut in.


Sent from my iPhone using Tapatalk

sent op a p.m.

headed your way.

Quote:

---

Originally Posted by catchNgrease

I tried to measure using my die set but the engraving was gone. My best guess is size 12 24 thread

Sent from my SM-G975U using Crappie.com Fishing mobile app

---

My units are old. I dont know where in the world I came up with 1/4 20. Senile senior here.

Quote:

---

Originally Posted by Cane Pole

My units are old. I dont know where in the world I came up with 1/4 20. Senile senior here.

---

My guess is because that's a really good pairing and you aim to use it as much as possible.

Sent from my SM-G975U using Crappie.com Fishing mobile app