Glue choice?

I've been tying jigs pretty
with eyes. In the process, I've tried using different glues for the eyes to be secured to the jig head.
I've tried Gorilla instant glues...for those, the glue begins to dry in the tip. That makes it hard to squeeze out any glue. Other than that, the glue seems to hold the eyes on powder coat paint.

When I tried the Locktite instant glue, I was surprised at how easy it was to put a pinpoint drop onto the dimple on the head. This made the problem of having too much glue go away with a good control of how much glue and how much easier to get the glue dispensed. With Gorilla, and it being hard to get squeezed out, it invariably got onto my fingers. That makes a mess...so Locktite has now become my "go to" glue for eyes.
Anybody else have suggestions of favorites?

Sent from my SM-G991U using Tapatalk

I skip glue and overcoat with UV resin. Some use epoxies.

Gorilla glue clear or a 2 part epoxy is what you want. BSI 30 minute epoxy is what I use. If you are clear coating with KBS or a UV resin you can get away without a glue.

Quote:

---

Originally Posted by Micanopy

I skip glue and overcoat with UV resin. Some use epoxies.

---

I actually did that one time, but the difference then was I had been only flattening the round ball head with a standard pair of pliers. When powdercoat was done, it was apparently so slick the eye wasn't getting stuck to the powdercoat.
Now, since I've got a dimpled spot formed by my grommet pliers, just applying UV over the eye may work since the dimple is keeping the eye edge in a below surface position.

Sent from my SM-G991U using Tapatalk

Quote:

---

Originally Posted by DrNip

Gorilla glue clear or a 2 part epoxy is what you want. BSI 30 minute epoxy is what I use. If you are clear coating with KBS or a UV resin you can get away without a glue.

---

Possibly, the Gorilla clear was one I tried that was referred to being a craft glue? I got a tube of it, and it put a good clear coat, but it was soft. Not a wet soft, that wasn't dried, but was soft when it was dried and after an 8-hour set time to being dried. It also put a very thick coating on the head....
I discontinued using it. It wasn't what I was after for appearance.
As you may have noticed, what I'm trying to do is make my jigs appear to be like a hard bodied lure, with soft tail action using the various bucktail, flashabou materials in different colors.

Sent from my SM-G991U using Tapatalk

Yeah I don’t know. The gorilla glue clear I used is hard when dried. Can’t pop an eye off. I have covered the whole head but you’ll need to let dry for a couple 2-3 days.

I am a Loctite user or Sally Henson hard as nails user.

Mike

I use Crazy Glue in the bottle with the brush.

I use to use Loctite gel but it had a problem with it getting hard in the bottle tip. I know use Sally Hanson and I have been very happy with it. It's cheaper also.

Sally Hanson clear works well. I also use the loon products a lot.

I use Sally Hanson to stick things on and like eyes, or a thread neck body, I will use the UV glue, thick formula by Solerez. Set it with the black light and when I'm done tying, hang the jigs on a rack outside for a bit. You'll loose it before it comes apart...

Quote:

---

Originally Posted by Grainraiser

I use to use Loctite gel but it had a problem with it getting hard in the bottle tip. I know use Sally Hanson and I have been very happy with it. It's cheaper also.

---

I was having the tip get plugged with Gorilla gel but when I switched to Locktite, it was so much easier to squeeze out a drop and not get too much that it would get stuck on my fingers.
I haven't experienced the tip being plugged on Locktite yet. I hope it doesn't. I'll watch out about that.

Sent from my SM-G991U using Tapatalk

I use a product called For Rhinestones Only. It's intended for nail art and sold at Sally Beauty Supply. I transfer it to a squeeze bottle with a needle tip. Very easy to work with and dries in about a minute. I put a dab in the socket, apply the eye and then overcoat. While it's wet it attacks the paint and makes it gooey, which sets the eye into the paint. Once it dries the paint rehardens and the eyes stay on practically forever. It also doesn't change the color of chartreuse paint like Sally Hansen and it doesn't go hazy like super glue can.

Attachment 415515

Nice


Sent from my iPhone using Crappie.com Fishing mobile app

Quote:

---

Originally Posted by hankll

I've been tying jigs pretty
with eyes. In the process, I've tried using different glues for the eyes to be secured to the jig head.
I've tried Gorilla instant glues...for those, the glue begins to dry in the tip. That makes it hard to squeeze out any glue. Other than that, the glue seems to hold the eyes on powder coat paint.

When I tried the Locktite instant glue, I was surprised at how easy it was to put a pinpoint drop onto the dimple on the head. This made the problem of having too much glue go away with a good control of how much glue and how much easier to get the glue dispensed. With Gorilla, and it being hard to get squeezed out, it invariably got onto my fingers. That makes a mess...so Locktite has now become my "go to" glue for eyes.
Anybody else have suggestions of favorites?

Sent from my SM-G991U using Tapatalk

---

Loctite with the Brush.