Rods for casting lights jigs

Printable View

02-12-2021, 07:17 AM
Smoltz

Rods for casting lights jigs

I have read some of the info and asked questions myself before on those JDM rods.
Given the situation in our world right now I would assume these are very difficult to come by?

I’m interested in looking to purchase a rod specifically for fishing 1/64 and 1/32oz trout magnets and similar sized jigs and using 2lb line. I normally use 2lb for panfish. I understand the ins and outs of line diameter...

But I’m looking for a ROD that can be had here in the US that would do a good job casting these and be no longer than 6’’6””. I looked at the TCB but I don’t know much about it specifically for this task.

This rod will be used specifically for this type of fishing for bluegill-crappie.
But I want it so I can get the best casting distance 1/64-1/3/2oz jigs and NO float.
What’s out there that has an action that can do this well? Thanks men.

Sent from my iPhone using Crappie.com
02-12-2021, 08:08 AM
BobC

I certainly would recommend that you take a hard look at the TCB. I have the predecessor TSS from Leland and it does a fine job casting 1/64-1/32. It is made for that. It is a nice value for the price - obviously not top of the line hardware but works just fine. A rod like that will give you a taste of what a JDM rod is like. My TSS all up weight is 8.2 oz and sold me on U/L fishing for pans/crappie. The fun factor is great!
Bob
02-12-2021, 08:12 AM
Alphahawk

Quote:

Originally Posted by Smoltz

I have read some of the info and asked questions myself before on those JDM rods.
Given the situation in our world right now I would assume these are very difficult to come by?

I’m interested in looking to purchase a rod specifically for fishing 1/64 and 1/32oz trout magnets and similar sized jigs and using 2lb line. I normally use 2lb for panfish. I understand the ins and outs of line diameter...

But I’m looking for a ROD that can be had here in the US that would do a good job casting these and be no longer than 6’’6””. I looked at the TCB but I don’t know much about it specifically for this task.

This rod will be used specifically for this type of fishing for bluegill-crappie.
But I want it so I can get the best casting distance 1/64-1/3/2oz jigs and NO float.
What’s out there that has an action that can do this well? Thanks men.

Sent from my iPhone using Crappie.com

JDM rods are very hard to source right now. I did a review of the TCB and it will cast a 1/64 ounce 45 feet using .128mm diameter line. I am sure there are some longer, more limber rods that will get you a few extra feet. The TCB is a great rod for the money and is very sensitive.

Regards
02-12-2021, 08:29 AM
deathb4disco

Both G Loomis and St Croix have a bunch of rods that would work for you.

Loomis SR 661 is one. St Croix Premier or Avid (in light or UL) are very nice, too.

All are more expensive than the TCB, though.
02-12-2021, 08:33 AM
Chris Stewart

Not all JDM rods are hard to source. The Tenryu Lunakia comes in 5'8" and 6'3" models, designed specifically for casting light jigs. The 5'8" model has a max lure rating of 2g (just over 1/16 oz) and a max line rating of 2.5 lb. Sounds like it was intended for your exact use. The 6'3" model has a max lure rating of 3g and a max line rating of 3 lb. Both have solid tips. Both are in the US and in stock.
02-12-2021, 09:38 AM
Alphahawk

If the Lunakia rods are in your budget I would certainly take a look at them.....you most assuredly will not go wrong with those 2 mentioned.

Regards

Sent from my iPad using Crappie.com Fishing mobile app
02-12-2021, 10:07 AM
deathb4disco

Quote:

Originally Posted by Alphahawk

If the Lunakia rods are in your budget I would certainly take a look at them.....you most assuredly will not go wrong with those 2 mentioned.

Agreed. They are better than the Loomis and St. Croix models I mentioned.

Plus, Chris is a member. Buy from him and support the small businessman. ;)
02-12-2021, 03:47 PM
Smoltz

Chris what is your website. How can I check these rods out?
Thank you all for the advice!

Sent from my iPhone using Crappie.com
02-12-2021, 04:10 PM
TXPanfisher

Another endorsement for Chris. Fantastic seller of some amazing fishing equipment.

Sent from my iPhone using Tapatalk
02-12-2021, 04:22 PM
Don Fischer

Quote:

Originally Posted by Smoltz

I have read some of the info and asked questions myself before on those JDM rods.
Given the situation in our world right now I would assume these are very difficult to come by?

I’m interested in looking to purchase a rod specifically for fishing 1/64 and 1/32oz trout magnets and similar sized jigs and using 2lb line. I normally use 2lb for panfish. I understand the ins and outs of line diameter...

But I’m looking for a ROD that can be had here in the US that would do a good job casting these and be no longer than 6’’6””. I looked at the TCB but I don’t know much about it specifically for this task.

This rod will be used specifically for this type of fishing for bluegill-crappie.
But I want it so I can get the best casting distance 1/64-1/3/2oz jigs and NO float.
What’s out there that has an action that can do this well? Thanks men.

Sent from my iPhone using Crappie.com

My favorite crappie rod is a 5' Okuma Celilo with a Okuma Ignite UL reel and 2# test line! Highly recommend it. Also have a 6' Shakespeare Crusader with a Kastking centron 3000 and 4# line n it. Have a couple 6'6" rods also but usually use them as loaner's.
02-12-2021, 07:07 PM
Alphahawk

Quote:

Originally Posted by Smoltz

Chris what is your website. How can I check these rods out?
Thank you all for the advice!

Sent from my iPhone using Crappie.com

Here is link to his site. Scroll to bottom of page to see the Lunakia models. I have the 6' 10" in this series. But as been suggested you may want to stick to the shorter models for crappie and bluegill. This rod is off the charts good...and extremely beautiful to look at. I have bought from Chris and he is great to do business with.

https://www.finesse-fishing.com/fine...ning-rods.html

Regards
02-12-2021, 07:10 PM
Alphahawk

Quote:

Originally Posted by Smoltz

Chris what is your website. How can I check these rods out?
Thank you all for the advice!

Sent from my iPhone using Crappie.com

Here is video of me using the 6' 10" Lunakia to catch crappie.

Regards

Slab Crappie On TenRyu Lunakia. - YouTube
02-12-2021, 07:28 PM
BobC

+1 Chris and finesse. Nice to do business with.
Bob
02-14-2021, 10:12 AM
Eagle 1

1 Attachment(s)

Attachment 394618 Another lower end rod that will work is the panfish Elite from bass pro shops . I use the Browning "Airstream "as well as the Okuma Cellio . All will do excellent on 1/32 with 4 lb. line . Have never tried 2 lb. line .
02-14-2021, 10:19 AM
skeetbum

I has a TSS and a browning Airstream and like them both. Also have a couple of other rods that do well with 2lb line of different types. I also have a 5’6” Fenwick that gets a lot of play. Point is, there’s a lot to choose from. Take a little time and handle what has your interest, WITH A REEL ATTACHED, before you buy. A couple of my rods cast a jig a long ways with just a flick of the wrist. I use the 5’6” rods a lot cuz I fish tight cover and longer rods smack branches, and I don’t need to beat up my favorites. Remember, happiness is where you find it. Keep us posted.
02-14-2021, 11:59 AM
Fishfishwish

I've used 2 pound SOS line with the Celilo. Worked fine. Even pulled in some bass with it.

Quote:

Originally Posted by Eagle 1

Another lower end rod that will work is the panfish Elite from bass pro shops . I use the Browning "Airstream "as well as the Okuma Cellio . All will do excellent on 1/32 with 4 lb. line . Have never tried 2 lb. line .
02-14-2021, 08:55 PM
skeetbum

And I forgot to add that’s a good lookin dinner there eagle, I’ll take some of those.
01-13-2022, 09:42 AM
LazyKB

I am looking for the same type of rod. I presently make do with 6 -6.5' medium, fast rods that have accumulated over the years with Pflueger President 25 and 4lb test. They do ok, not great with 1/16 jigs but I would like to do better and also go to 1/32. I will check out the TCB. Have any of you tried a Temple Fork or a BPS Pan fish elite? Seems to be problems with TF but maybe its guys like me that never had a UL.
01-13-2022, 10:25 AM
deathb4disco

Quote:

Originally Posted by LazyKB

I am looking for the same type of rod. I presently make do with 6 -6.5' medium, fast rods that have accumulated over the years with Pflueger President 25 and 4lb test. They do ok, not great with 1/16 jigs but I would like to do better and also go to 1/32. I will check out the TCB. Have any of you tried a Temple Fork or a BPS Pan fish elite? Seems to be problems with TF but maybe its guys like me that never had a UL.

Temple Forks makes good stuff and has outstanding customer service. I have owned two of their fly rods and one spinning rod. I would probably pick the TCB but would happily fish with Temple Forks.
01-13-2022, 11:38 AM
BobC

TCB rod is a good one for sure. It will work for the jig weights you want to use and depending on the water you fish you can even drop to 2lb test. 4lb should be fine.
Bob
PS I have one on the way right now to use along with my TSS. I will set it up a little differently.
B
01-13-2022, 04:19 PM
LazyKB

Had an on line chat with Temple Fork, they have no inventory and don't expect any till the later part of 22 or first part of 23.
01-13-2022, 04:24 PM
gillchaser999

Quote:

Originally Posted by LazyKB

Had an on line chat with Temple Fork, they have no inventory and don't expect any till the later part of 22 or first part of 23.

Thanks for the info.
I was looking at either a 5’6” or 6’ TFO Trout and Panfish rod for my next purchase .
I have the 6’6” but I’m in to shorter rods at this time.
I’ll probably change my mind in a couple of weeks and have my 6-8’ rods out playing with them . I go in cycles . :)
01-13-2022, 06:09 PM
BuckeyeCrappie

I have two of the TCB Rods and can’t be happier. I paired them with BnM Pro 50 reels which was the perfect setup and balance for me. Perfect for light tackle and slingin Slabs!
01-13-2022, 06:24 PM
deathb4disco

Quote:

Originally Posted by LazyKB

Had an on line chat with Temple Fork, they have no inventory and don't expect any till the later part of 22 or first part of 23.

Yeah, their rods are made in South Korea, so that’s not surprising.

However, you might be able to find one at BP or Cabela’s. My local Cabela’s has TFO fly rods.
01-14-2022, 08:11 AM
BobC

Quote:

Originally Posted by BuckeyeCrappie

I have two of the TCB Rods and can’t be happier. I paired them with BnM Pro 50 reels which was the perfect setup and balance for me. Perfect for light tackle and slingin Slabs!

You’re a brave man slinging with the TSS/TCB rods. They are really terrific rods for the money but I would be cautious when it comes to slinging!:Rofl
Bob
01-14-2022, 09:30 AM
catchNgrease

I would also also recommend these:

1. Cashion CRT...125$
2. Pro Angler Tackle...55$
3. Norseman ESP...65$... my favorite at the moment.

I do own a B&M TCB...It just never grew on me.

Sent from my SM-G975U using Crappie.com Fishing mobile app
01-14-2022, 03:13 PM
BobC

Quote:

Originally Posted by LazyKB

Had an on line chat with Temple Fork, they have no inventory and don't expect any till the later part of 22 or first part of 23.

That’s a real shame for a company. Enough of that and they’re out of business!:banghead
Bob