Vacuum chamber

I see some guys on YouTube use the vacuum chamber to remove air bubbles from their plastic before injecting, any of you guys use one? If so is it really worth it?


Thanks,
Nate.

For me it’s not worth the time .

I agree its not worth if u have a bunch of microbubbles just let it cool off for a sec then put in microwave for another 30 seconds keep repeating and they will disappear

Never seen the use for one. I use a heat gun to get rid of any bubbles that I have. Seems to work pretty good.

If you use 5mm or 1/4 inch glass stirring rods instead of flat stirring implement you will greatly reduce the number of bubbles in solution.

I haven't seen a need for this with bait plastics and the method described above.

Quote:

---

Originally Posted by njones

I see some guys on YouTube use the vacuum chamber to remove air bubbles from their plastic before injecting, any of you guys use one? If so is it really worth it?


Thanks,
Nate.

---

Quote:

---

Originally Posted by liprippa

If you use 5mm or 1/4 inch glass stirring rods instead of flat stirring implement you will greatly reduce the number of bubbles in solution.

I haven't seen a need for this with bait plastics and the method described above.

---

I’m going to give this a try, I am currently stirring with butter knifes. Thank you for the tip.

Thanks, Nate.

Quote:

---

Originally Posted by njones

I’m going to give this a try, I am currently stirring with butter knifes. Thank you for the tip.

Thanks, Nate.

---

That’s what we’re currently using the store plastic

Quote:

---

Originally Posted by njones

I’m going to give this a try, I am currently stirring with butter knifes. Thank you for the tip.

Thanks, Nate.

---

That’s what we’re currently using the store plastic We do not have as many bubbles as we used to jam the butter knives work out terrific.

Back when I started 2014 I would've loved one with the plastisol I started with. Now a days there is better plastisol and not needed. Any bubbles I get I let sit for minute or so then run a torch across the top to burn the bubbles off.

Yeah I don’t notice to many bubbles with the dead on Plastix

Blow moderately on the bubbles through a straw. Surprisingly it makes them go away.

Interesting, I’ll have to give it a try