Printable View
I've been reading up and watching the occasional video on tying jigs.
I was initially considering a peak vise, but now I'm thinking about purchasing the Renzetti Saltwater Traveler with the streamer base.
Attachment 392453
Other than the cost, is there any reason to not go this route?
Any recommendations for videos, books, tools, etc. that are must haves for tying crappie jigs?
What are your recommended places to purchase supplies, including the vise?
PM Skip.
I’ve been tying on an older Renzetti for over ten years and I like it a lot. I use the table top base but also have the clamp base. Smooth working, I’d buy it again.
I personally prefer the Peak although both are good. Both are made in USA which I like. Doesn't sound like money is the issue but for the same amount you could get the Peak and then some accessories or tools. The brass knobs, D-arm, waste bin, material clip, extra bobbins, etc... whatever you think you would need. I think Skip told me when I had asked if you have larger hands you might prefer the Renzetti. I would suggest if you have anywhere to go check them out to do that. Both are some of the most popular vises and I think either would work very well for you. I'm sure you seen lots of reviews online here is a quick one I found.
https://youtu.be/r8R9g0UpLnU
I have a Renzetti Saltwater Traveler as my back up (bought it before I bought my Nor-Vise) and have been thinking of using it more lately. Such great access on this vise to the item your tying. Lots of room around the head for fingers and such! I also do use a "C" Clamp type.
A fine vise!
Skip
As I tend to do, I ended up going a bit farther down the rabbit hole in terms of research and dollars spent.
After reading several reviews and watching many videos on the subject, I ended up ordering a Regal vise. I have a Pine Green Revolution vise with the Big Game jaws and Traditional base on the way.
I hope to be posting some pictures shortly of the vise, and some jigs I've tied.
LOL, if your gonna go might as well go big! Congrats on the new purchase and welcome to the addiction. Looking forward to seeing some pictures.
I got a traveler about 20 years ago. I tie commercially both jigs and fly's. I buy about 4.000 hooks each year so that should give you a idea of how many flies have been tied with this vice. Only problem I ever had was the O-ring broke. I got 2 O-rings and put them on. This way if one breaks I have a insurance policy. If it does break there is some parts that come off. At least a ball bearing. That was many years ago so I may be wrong on the number of parts but when traveling it is easy for me to loose a part then not be able to tie. I do not think you will be disappointed with the purchase of a Renzetti.
Dang you must have spent a good bit more than the two vises you ask about, lol? Looks like I would have got it for less since I like the "C" Clamp vise.Quote:
Originally Posted by ryanjay11
Skip
Don't cost no more to go first class. You just can't stay as long......
https://www.crappie.com/crappie/blob...9-56f4f3dd9b2c
Attachment 392941
I’m still waiting on supplies and tools to be delivered. In the meantime, I’ll have this beauty to admire. :cool:
https://www.crappie.com/crappie/blob...4-0417c44b1b0fAttachment 392942
She's a beaut Clark.......
Very nice. Looks like quality craftsmanship.
Very nice. What size hooks will fit the jaws?
Sent from my SM-T580 using Crappie.com Fishing mobile app
Enjoy that nice clean table top. Once you get you supplies and start tying it will never be the same. :yikes
This has the Big Game jaws that fit hooks 22-5/0. It will cover anything I'd ever tie.Quote:
Originally Posted by slowhand
That is actually the kitchen table. I'm blessed to have an understanding wife.Quote:
Originally Posted by GrumpyLoomis
This is a crankshaft out of a 429 on the same table.
Attachment 392964
My jig tying operation will be out of a tote until we move into a larger house.
I'm used to doing this sort of thing. I did a full drivetrain and suspension build on my F100 in our driveway, rolling it out of the garage to work, then back in and cleaning up each day.
Attachment 392965
Attachment 392966
Attachment 392967
I'm going to cast and powdercoat my jigs as well, so I'll be back out on the driveway again.
Very impressive truck project, my son does those things too. I live in a small house and am use to clean up at the end of every session. If your jigs turn out half as good as your truck you will be the master in no time.
I had one of those with the SS jaws. Really like it but bought one of these. Force PredatorAttachment 393093 Vise....its a beast. Is a true center rotary as you can slide the jaws up and down to put the point in the center.
Attachment 393094Here is a better picture.
These have a 5/8" shaft. I love mine. Were out of my reach but found one used and got it for $320. Very heavy base.
I see so many new vises being sold here now and some look really interesting! Like the Cottarelli T-Rex Vise a double jaw vise made in Italy and the Stonfo Vise looks really good too, both are pretty high cost though. Seems there are new ones showing up from time to time and the high end seems to be adding more.
Skip
Cool stuff there, I’m using low end stuff.LOL
try one of these: