here is one of the little b tiny things i carry right here
show us some more of your micro baits
rules are as follows 1 inch and under please :Rofl
Printable View
here is one of the little b tiny things i carry right here
show us some more of your micro baits
rules are as follows 1 inch and under please :Rofl
Wow, that is one small bait or you have Troy Aikman hands!:Rofl
Bob
I have some tiny bobby garlands and a whole bunch of tiny stingers from Bob jigs. What I’ve been doing lately is using some 2” Shad stingers then when the head is messed up I cut them and turn them into the tadpoles. Works great and bait has double lifespan. Pretty sure I could get them to 1” I know the 1.3” is easily obtainable but on the water I don’t measure I just cut and rig then fish.
:highfive
Attachment 392344
Trout magnet is a 1” deadly killer.
Ketchn- I have that mold, Awesome in black.
Attachment 392388
3/4 inch and made by a Board Member over in the Jig Tying and Plastics Forum....Waximus....good for all Panfish especially Gills
Sent from my iPhone using Crappie.com Fishing mobile app
I use the Bobby Garland offerings a lot. I also use some made by H2oHammer, another site member. I do well with them all. Pics tomorrow, too worn out now.
Ive got a few hundred in my bag in pole barn too lazy to go take pics, catch a ton of crappie on them at certain times using 1/64 oz jig.
Can't wait to try those on the gills......
I have some much smaller in diameter but are longer than the stated 1 inch. These are all 1 inch lures. As you can see one of them is a 1 inch spinner. It weighs only 1 gram and requires the patience of Job to fish...but it can flat catch some fish. Those offset assist hooks are #10 and are as sharp as a hypodermic needle
Regards
Those will kill the big crappies up here at ice out or early winter. I’d try them icefishing if we ever get ice. Where can I order some that size and is there different colors of them Ketchen?Quote:
Originally Posted by Ketchn
I do some hand ties that are a wee bit longer than one inch.
My favorite jigs are 1/64 oz jig heads with miniature black/chartreuse tube jigs, which are under 1". I also like 1/64th oz hand tied Blue Truse jigs from Pepop
Attachment 392418.
I do use split shot to get them down faster but I've caught 16-inch crappie and an 8 lb bass using 1/64 oz jigs in the past.
Last year I had success using 1/32 oz jig heads with small soft plastic jigs hand-poured from Limits Tackle.
I've always thought smaller was better.
Attachment 392419
Northland Water Flea
Not always targeting crappie, but have picked up a few on these:
Mister Twister 1" Lil Bit
Betts 1" split tail
Daredevil Skeeters 1"
Hilderbrant #0 Flickers 1"
Yozuri Snap Beans 3/4" & 1"
And some very well tied 1" jigs purchased years ago from a gentleman in North Carolina.Attachment 392424
Attachment 392422
Here is a few of my tiny baits. They are 1 and 1 1/2 inches in length.
Attachment 392446Attachment 392446
Here is a few of my tiny baits. They are 1 and 1 1/2 inches in length.
Attachment 392446Attachment 392446
Here are some of the small lures I use.Attachment 392482
What are the brands of some of those? I like themQuote:
Originally Posted by RLS40
Don't have pics but I picked up my two PB (length) fish on 1/64oz hand tied jigs. One was solid black, which is my favorite color. The other was an oddball I threw together with some colors I rarely used, orange and yellow.
In the summer I catch a lot of fish on Bob's Jigs little Silverfish.
https://www.crappie.com/crappie/atta...a-dsci0071-jpg
limits tackle makes some of them and so does another friend of mine in Oklahoma , its a common mold that a bunch of folks have .Quote:
Originally Posted by chaunc
I got the four Panfish jigs are from Netcraft. The two fat head jigs are tungsten. The three spoon type lures are made from willow spinners. The two tube jig heads are home cast.
I got the four Panfish jigs are from Netcraft. The two fat head jigs are tungsten. The three spoon type lures are made from willow spinners. The two tube jig heads are home cast.Quote:
Originally Posted by SuperDave336
These are one inch.
Mike
Attachment 392614
dem iz NICE my friend :cheers2Quote:
Originally Posted by shipahoy41
if you need them tested and hand modeled, feel free to contact me in a pm ....
my rates are low and my service is outstanding .....just saying :biggrin
ok. I accept your offer. Send me a self addressed and stamped (about $1.50 in postage) envelope and I will send you a half dozen jigs as well as jig heads. Your obligation will be to field test with photos, as well as hand model them. I believe your service will be outstanding. If you want to learn how to make soft plastic lures for yourself them email meQuote:
Originally Posted by Ketchn
Contact information is in the PM sent.....just sayin :highfive
Mike
careful what ya wish for my friend :Rofl
I see Bob's Jigs has the 1" Baby Shad stingers back on his website. Good looking baits!Quote:
Originally Posted by Oregon slabman
Bob's jigs makes lots of very good items , i used several of his baits and to be sure ALL of them had their day in fisheez lips :highfive
i personally loved his teeny tiny version of the jelly jig ....man does it hurt a finicky crappie :cheers2
Any particular times or just when they want nothing else ?Quote:
Originally Posted by dbowling
1/80 . Bay springs special .Can easily trim down the marabou Attachment 393042
I like me some micro baits bcause them crappy n gills like'um....
Attachment 393045
Attachment 393046
Attachment 393047
You sure do tie up some pretty jigs SK. Nice photos and dime helps for scale. :highfive
OK, I drank the Tea TODAY! I never fish micro baits mainly because it catches small fish. Yesterday I did my usual thing, jig tipped with a minnow 14-15ft down, always paid the bills in winter for almost a scratch day. Had 2 keepers, weak. Anyway after reading THIS thread I regrouped, rerigged, and went out today with the intention of fishing small, all day. All I can say is, HUMBLE PIE, I'M EATING HUMBLE PIE! Thanks to all who have posted suggestions in this thread as I caught my limit today of keepers at about 7 throw backs to one keeper. Had a great day! pictures are of my livewell at 2pm, they turned on about 3:30 so hot I had two at a time for 10 minute stretches. I poured the jighead, it's a Jason's 1/32 mold with a #6 Sickle hook. The plastic is Southern Pro's 1-1/2in Stinger bitten down to 1in. Thanks Again!
Attachment 393057Attachment 393058
You want small jigs, I got em. These are some of the jigs I use when I go ice fishing(if we ever get any safe ice). Sometimes the tiny ones is the only thing they want.Attachment 393060Attachment 393061
Sent from my LML212VL using Crappie.com Fishing mobile app
Attachment 393472
Received my order today from Bob’s Jigs on the tiny 1” baby shad baits. Silver, black and white. All look good and tiny did I mention tiny.....lol.