Printable View
I have an older Legacy 24v that I bought online that just doesn't suit it's inteded application. As a whole it doesn't run exactly right. So I have decided to chop it up and sell it for parts to try and recoup my investment.. It is the mk with the white head. And the foot pedal is the flat plug. Pricing will be 50% of Northland Marine pricing for power drive parts.
Sent from my E6810 using Crappie.com Fishing mobile app
What’s not quiet right about it?
Sent from my iPhone using Tapatalk
Out of the water it runs great. Bogs down and struggles when in the water. I have been through it completely and everything appears solid.
Sent from my E6810 using Crappie.com Fishing mobile app
Can you give us a model name/ number, maybe a picture.
Legacy, white head and flat plug does not give us much to go on.
Thanks
It's a Riptide early model white, flat plug means the foot pedal has the old flat plug instead of the newer round plug, Legacy is just what they call the older models in this case a power drive. Hope that helps a little bitQuote:
Originally Posted by MikeF
Sorry for the lack of details. It is a Legacy made by Minn Kota. It is a 24V 48# thrust.
MK040824752Attachment 378995Attachment 378996Attachment 378997
Sent from my E6810 using Crappie.com Fishing mobile app
catchNgrease
Thanks for the pics.
Looking for a project motor to build a auto Livscope system for a friend.
Your motor won't work for what I have in mind.
Thanks again.
Good luck with the sale.
Actually I'm thinking this unit could be perfect for a LS mount.Quote:
Originally Posted by MikeF
Feel free to PM. The unit as a whole is definitely cheaper than you think.
Sent from my E6810 using Crappie.com Fishing mobile app
Sounds like a bearing or brushes maybe? Where you located? Shipping?Quote:
Originally Posted by catchNgrease
Sent from my iPhone using Tapatalk
Bad seal letting water in will cause this problem.
Been through it completely brushes are good. Springs are very active. I shined up the bruses and the commutator. Neither had any dark spots before I began cleaning them. The bottom bearing is very smooth and free spinning. Unit was and is still dry as a bone. The plain housing bolts are straight as an arrow. The steering motor is very solid. The prop motor does seem to bog down out even if out of the water at 90-100%
I live in N.Alabama. but I have a good friend that lives in Tupelo that fishes with me. I would think shipping would be free if your anywhere close to there.
Sent from my E6810 using Crappie.com Fishing mobile app
pm sent
Does Auto Pilot work properly?
I'm not sure how to test that.Quote:
Originally Posted by Crappiet
Sent from my E6810 using Crappie.com Fishing mobile app