Basstackle is out of stock due to the Virus. Others are thin walled and no locking pin. Another with a locking pin has an immoveable plunger that King Kong couldn't budge. Any sources out there?
Printable View
Basstackle is out of stock due to the Virus. Others are thin walled and no locking pin. Another with a locking pin has an immoveable plunger that King Kong couldn't budge. Any sources out there?
Good evening Frank you can go to bait plastic they do have a locking type injector.Quote:
Originally Posted by Frank300
Thanks!!!!
The injectors are out of stock like BassTackle. This virus has everything messed up. Thanks
Yes it sure does have everything messed up good news is fat guys are thinking about making a injectors in the next month or two
Do it Molds has a 9.5 injector in stock. It has the locking pin for the head. I have never seen one in person so I do not know how thick the aluminum body is.
I looked andBait Plastics injector is out of stock too.
I ordered one from Do-It molds. I hope it is good. BassTackle is the best I have used.
agree with you and Frank on the bass tackle.Quote:
Originally Posted by Frank300
I’m happy with my Do-It 9.5 oz injector. The plunger on this one doesn’t extend too far like Bass Tackles. Bass Tackle's I hated because of this. Constantly little pieces of plastic got stuck behind the plunger.Quote:
Originally Posted by Grainraiser
Check on Facebook... They sale some Big Injectors... If you want to buy from them just message them on Face Book..
Quality Injector & MoreMike Powers
Duals Kits
4oz to 20oz
Single injector prices
4oz to 20oz
We are about 14-24 day turn around! (Strive for quicker time)
...
*dual kits include blending block*
I will check it out even though I bought an 8 oz and a 9.5 oz. I had no idea these existed! Thanks!
I contacted Marty Trammell who owns Quality Injectors . I ordered two of them. An important note after using Ultra Mold and Do-I, Mold 8 oz and 9.5 oz injectors, the diameter of each of those injector openings is 1/4 " instead of 3/8" like BassTackle and Marty's injectors . The smaller size makes injecting difficult as it requires more pressure to inject. I never would have bought an injector with a 1/4' HOLE had I known. IN ADDITION THE ULTA MOLD AND DO-IT MOLD INJECTORS Also require a lot of strength when sucking th plastic to of a container. Their rubber gaskets cause a skipping sensation inside the injector when you are filling them. I attribute this to the small diameter injector hole.
On my injectors after so long in the build up plastic inside in what I do is a spray some Pam inside and push the plunger back-and-forth then wipe off the excess off of the end of the plungers this will free it up and make it smooth running
These injectors are new and their washers are ribbed, not round. They are lubed heavily with worm oil after each injection. No issue ever on the BassTackle injectors, however the Ultra Mold and Do-It mold injectors both skip when pulling and pushing the plunger no matter what.
Frank could it be the o ring in those Injectors are the wrong ones I will try to change them to see if it makes a difference if it didn't I'd get rid of the injectors.I have bass tackle and good all reliable bear.Quote:
Originally Posted by Frank300
These ae brand new injectors with ridged o-rings, not smooth like BassTackle on the plunger. The O-rings on the caps are smith like BassTackles. The extra o-rings that came with them are ridged too. I will look for smooth replacements, however it is where and the correct diameter. The o-rings are larger than BassTackle. The Ultra Mold injector will get me by until the new ones arrive.
Let me know how the new ones work out for you I want to replace my 8OZ.Quote:
Originally Posted by Frank300
My large capacity do it injector has smooth o rings and smoothest injector I’ve used. The inner diameter of the injector port is 3/8” not 1/4”. I bought mine like 4 years ago and maybe they have changed? McMaster Carr is where I would get replacement o rings.
Attachment 375321
The Do-It injector works, but with extreme pressure to fill a large multi-cavity mold. I am convinced the 1/4" opening in the cap versus 3/8" opening is a major factor in the need for increased pressure required to fill the mold. IN addition the marble size ball on the Do-It injector hurts the palm of your hand when injecting. My new injectors will be here in a couple of weeks. I will let you know how they work.
Wild. Wonder what made them change the design of the injector to a 1/4” opening since I bought it years ago. I have no problem and have injected multiple molds with one draw. Biggest mold 48 cavity and no problem. Let us know how the new injector works.
On a side note Frank I need some of your smaller bait once you get going. I don’t have anything small and haven’t poured in a year now.
Will do. Unless the plastic is Really hot it is a serious physical effort to suck plastic and inject. I am convinced the 1/4" cap opening is the issue.
Injectors Finally arrive this Friday!! I will report here after I put them to the test!
Got the two 8 oz injectors a hour ago from Quality Injectors and More. W O W!!!!!!!. Shot two 40 cavity molds in 5 minutes. 8 bags of baits. Smooth as silk. Flawless operation and superior craftsmanship. They are the GOLD STANDARD for Injectors! If Anyone wants to buy a Use Ultra Mold 8 oz or Do-It mold 9.5 orz PM me. Cheap. You pay shipping.