My homemade Live Scope mount

No pictures yet, but I bought a transom mount bracket for a trolling motor from Amazon for $44.00 to mount my transducer to the front of my boat and cut the screw on part off. I then bought an adjustable reaching pole [made like a painter's roller extension pole] to mount the transducer on. The shaft is a perfect fit for the mount. I cut the small part of the pole off and used it to make a telescopic handle so I can turn the transducer 360 degrees. I'm going to use another transom mount bracket to mount my 360 transducer. Humminbird sells the same bracket that I'm using for $249.00. I have around $60.00 in my setup.

Sounds like a good setup

Sounds nice, would like to see some pictures when you can post them.

Can’t wait to see pics trying to figure out how to mount mine without spending a ton more money

Pics yet????

Nice, i hope you can post pics too

Sent from my SM-G965U using Crappie.com Fishing mobile app

Quote:

---

Originally Posted by spindle

No pictures yet, but I bought a transom mount bracket for a trolling motor from Amazon for $44.00 to mount my transducer to the front of my boat and cut the screw on part off. I then bought an adjustable reaching pole [made like a painter's roller extension pole] to mount the transducer on. The shaft is a perfect fit for the mount. I cut the small part of the pole off and used it to make a telescopic handle so I can turn the transducer 360 degrees. I'm going to use another transom mount bracket to mount my 360 transducer. Humminbird sells the same bracket that I'm using for $249.00. I have around $60.00 in my setup.

---

I can't get my pictures to post, but if anyone would like some text me your number and I will text you them.

Pm Ed my number. Text them to me and I’ll see if I can load them for you.

Pics texted to Cray. Thanks

Quote:

---

Originally Posted by spindle

Pics texted to Cray. Thanks

---

Haven’t received them.

The shaft is full adjustable up and down. It will retract into the mount when being stowed. ThanksAttachment 361923Attachment 361924Attachment 361923
Attachment 361926

Sent from my iPhone using Crappie.com

That doesn't look like the live scope transducer unless it has changed??? But great looking mount.

Quote:

---

Originally Posted by faithfularcher

That doesn't look like the live scope transducer unless it has changed??? But great looking mount.

---

It’s mounted to the other side. He has 2 transducers on that shaft.

NOGGIN POWER!

Did you drill out the top of the like? Can't tell from pics how you made the handle...like that setup

Sent from my VS990 using Crappie.com Fishing mobile app

Why 2 transducers? I thought that the livescope transducer shot 3 angles = Forward, side and down??:scratchhead

u2s

The front transducer is for livescope. The other transducer is for 2d, Downscan and Sidescan. I also run the Livescope transducer and a GT54UHD on my bow graph but I have the Livescope transducer on a pole and the other one on the trolling motor.

Quote:

---

Originally Posted by Orion_70

Did you drill out the top of the like? Can't tell from pics how you made the handle...like that setup

Sent from my VS990 using Crappie.com Fishing mobile app

---

Yes I drilled a hole completely thru the top of the main shaft and used the small piece of the adjustable pole to make the handle. I epoxyed the handle to the main shaft. While I'm prepping to launch the boat I stand the shaft up vertically to make entering the front of the boat easier.

You got to be careful launching? Or use the other side if possible?

Sent from my SM-G965U using Crappie.com Fishing mobile app