Attachment 350051Attachment 350052Attachment 350053Attachment 350054
Here’s a couple pics of my summer project .... it has take a little while to do .
Sent from my iPhone using Crappie.com Fishing mobile app
Printable View
Attachment 350051Attachment 350052Attachment 350053Attachment 350054
Here’s a couple pics of my summer project .... it has take a little while to do .
Sent from my iPhone using Crappie.com Fishing mobile app
Yes, I think you will be on them like a pan cake on a buttered grill. Looks good to me. You got me a spot saved on there? I'll be glad when it gets cool again. :highfive
Looking good
Recommend adding a few rod holders.
Sent from my SM-G965U using Crappie.com Fishing mobile app
That seat base looks awesome. Is that aluminum and did you buy or make it?
Sent from my SM-G955U using Crappie.com Fishing mobile app
The whole boat looks good. Nice clean work. Well done sir!!!
Sent from my SM-G955U using Crappie.com Fishing mobile app
THANK YOU ! It is all made from aluminum and I made everything !Quote:
Originally Posted by Tev8514
Sent from my iPhone using Crappie.com Fishing mobile app
You can weld aluminum.Quote:
Originally Posted by Pchop
Nice
I cant
Sent from my SM-G965U using Crappie.com Fishing mobile app
Super job, congrats- Can't wait for fall to.
Very nice work, looks great
Let me know if you need something welded .... if I have time I would be glad to helpQuote:
Originally Posted by brettw
Sent from my iPhone using Crappie.com Fishing mobile app
Looks like you are doing a great job and you have created a crappie slaying vessel
Sent from my SM-G973U using Crappie.com Fishing mobile app
ThanksQuote:
Originally Posted by Pchop
I saw this product where you get the metal hot with a torch and the just feed some type of welding rod into the joint. Looked good, no welders helmet needed
Sent from my SM-G965U using Crappie.com Fishing mobile app
Those crappie are in trouble now!’
Sent from my iPhone using Crappie.com
Nice work!!! That setup will be deadly!!!
Boat looks good. You have done a great job on the front of your boat. I'm getting ready a bit differently though....with crossbows, deer stands, food plots, etc. Regardless, I'm READY for a bit cooler weather.
I have seen that but I’m just not sure about it !Quote:
Originally Posted by brettw
Sent from my iPhone using Crappie.com Fishing mobile app
Awesome job! Do you MIG or TIG weld aluminum? I just bought a spoolgun for my Miller 211 but haven't took it out of the box. I have used a spoolgun on my old MIG welder. I have a arc welder I can TIG weld steel only on. Also do have something to bend the rod holders or do you heat then bend?
Great looking job all around.
How did you coat the rod holders ? I used Plastidip like you use to coat tool handles like pliers, etc. but they are much smaller than the rod holders. Just wondered how you dipped them or coated them. I'd like to do mine if I can figure out a good way to do it. TIA
I tig weld the alum.Quote:
Originally Posted by turkeyfootnc
I have a jig to bend the SS rod and tig weld them together . I use 1/4 “ SS rod
Sent from my iPhone using Crappie.com Fishing mobile app
Plastic dip and just pour it in a cup that is wide enough and deep enough , I used the plasti dip spray to do the mount systemQuote:
Originally Posted by SeaRay
Sent from my iPhone using Crappie.com Fishing mobile app