What is everyone using to mark there trolling poles to help set depth. I have tried tape but seems to come loose easily. Any suggestion?
Printable View
What is everyone using to mark there trolling poles to help set depth. I have tried tape but seems to come loose easily. Any suggestion?
Use pin stripping. You can get it from auto parts store.
Sent from my iPhone using Crappie.com Fishing mobile app
How wide does the pin stripping comeQuote:
Originally Posted by SMOKEWOLF67
Sent from my SM-N950U using Crappie.com Fishing mobile app
1/4”. I use the reflective color pinstripe. You can see it easily. You can also put 2 stripes next to each other. If you want something wider, you can use masking tape and paint.
Sent from my iPhone using Crappie.com Fishing mobile app
Liquid white out?
I use pinstripe tape then put a coat or two of clear vinyl lure and jig finish over the top of the tape.Works just fine.
Sent from my SAMSUNG-SM-G891A using Crappie.com Fishing mobile app
I've had painters tape on my rods for over a year now. I made sure the seam was at the top of the rod so the line didn't catch.
A little hint. If you decide to use red enamel model car paint like I did, don’t do it on the kitchen table next to the sweater your wife has been crocheting for several weeks.
Sent from my iPad using Crappie.com Fishing mobile app
Very good advise!!Quote:
Originally Posted by roachjwr
Sent from my iPad using Crappie.com
I use one wrap of painters tape . 14 ft. poles .Only mark 1/2 of pole guess off of that .
I use a paint stick white in color. This is used to mark on steel pipe. Will last years.