4 Attachment(s)
2005 Tracker Pro Crappie 175
2005 Tracker Pro Crappie 175 with Mercury 50HP Motor - $5,500.00
This is not your ordinary Crappie fishing boat.
I have used this boat every day that I am able to get
out since I am retired with trips averaging 3 to 4 hours.
This boat has been used for everything from Stripers to Bluegill.
I have set it up with electronics and everything
you need to have fun fishing.
This boat has been mechanically serviced regularly with a recent tune-up.
This boat has been modified from a 12v to 24v Trolling Motor.
From Bow to Stern here are the main features:
Minkota Maxxum 24v Trolling Motor 1 year old
Huminbird Helix 7 Down Imaging with GPS on RAM Mount on Bow
Comfortable pedestal fishing seats front and rear
Bait well which I use for dry storage
Forward live well
Additional Dry stroage under seat
Rod Locker on passenger side
New driver and passenger seats
Huminbird Onix 10 Side and Down Imaigng with GPS on RAM Mount at Console
Live Well under passenger seat
Additional Bait Live well being used for dry storage
Two Pedestal positions for rear fishing seat
Minkota 3 Bank Charger for easy plug in charging
This has a custom added Voltage Switch which allows you to
select battery one or battery two or both and off for charging
The Trolling Motor is on a 50 AMP block
At the Stern is a PowerPole Micro Anchor with 8' Pin on a removeable
bracket on the transom.There are two FOB controllers for it as well as a phone APP
Two Inch Boat Buckle Tie Downs
And on the Trailer from Bow to Stern:
It has a folding tongue with wire retractable saftey hooks (no chains hanging on the ground).
The little wimpy winch that was originally on the trailer has been
replaced with a 1800lb winch for easy cranking. (Overkill is my middle name )
The pivot jack has also been replaced with a 1200lb unit
All lights functioning and water proof.
New Axle with Steel-belted Radial Tires
New Bearings
Spare Prop and Motor Toter
Attachment 335753Attachment 335754Attachment 335755Attachment 335756
I am home in Melbourne, FL now
It was a boat that I got from a Charley in Forsythe, GA
It was showroom when I got it and the guy wanted to sell to someone who wants to fish it .
That would be me, as you could literally remove the engine cover and lick it and it was clean, less than fifty hours or so on the motor.
I took it to James Perry in Sequatchee Valley, Tn and he said it tested for leakdown and compression without any problems an gave it a top grade. (one of the best he had tested)
I got it to fish and I outfitted it with nice reliable gear and use it every day (still do) that I can get out
I'm going in the AM and I love the micro anchor as I fish solo most of the time.
Regular upkeep on tune ups and water pump exchanges, lower unit etc..
No saltwater no ethanol never.
Bass fish in FL and Whites, striper and crappie in TN
I originally had TN numbers on it and then a few years ago I re-registered in Florida.
