Looking for help on the best way to repair this. Ignore the fishing line. Long story.
Attachment 335705
Sent from my E6810 using Crappie.com Fishing mobile app
Printable View
Looking for help on the best way to repair this. Ignore the fishing line. Long story.
Attachment 335705
Sent from my E6810 using Crappie.com Fishing mobile app
I glued mine with five minute epoxy and bought a spare to keep in boat went ahead and ran cable to back of boat and wrapped in plastic bag, will just take as few minutes to replace when glued one fails.
I glued one like that several years ago. Used super glue and it lasted a lot longer than I expected.
Here is what I use. Bevel edges and clean according to instructions. I use 3 thin layers expanding each layer.
https://www.lowes.com/pd/LOCTITE-Yel...hesive/3220051
Thanks for responses. I had considered beveling for more contact and using the heavy duty 3M stuff. And as crazy as it sounds cinching down a small radiator clamp and the glueing it also
Sent from my E6810 using Crappie.com Fishing mobile app
What Cray said. Other than that, I don't know.
But I would like to hear the fishing line story.....:pray
Just be careful you don’t twist it out of shape.Quote:
Originally Posted by catchNgrease
Sent from my iPhone using Crappie.com
I repaired one with 30 min.epoxy,it held a few years until I bumped it
When I would get up plane the transducer would come up and smack the transom. Sounded like a rod knocking. The fishing line was the first thing I could get my hands on to tie it up. Went through Lowe's and found a plastic fuser.
Sent from my E6810 using Crappie.com Fishing mobile app
What transducer and FF? Looks similer to a couple I have on my "junk box"....might be able to help you out with a replacement.
It's a HB 988c si
Sent from my E6810 using Crappie.com Fishing mobile app
CatchN.....sorry brother. I guess pics are deceiving. I thought it might be an older 2D sonar unit.
LoL I thought it was an older 2d model.
Sent from my E6810 using Crappie.com Fishing mobile app
Oh
Second trip out and still going strong.
Sent from my E6810 using Crappie.com Fishing mobile app
To update this thread several trips out and the plastics fusion method is still holding strong.
Sent from my E6810 using Crappie.com Fishing mobile app