I can't afford multiple fishfinder units for my boat. Does anybody have suggestions how to setup where one unit can be moved from the "captains" chair to the bow?? I plan on being able to move the transducer as well. Thanks in advance for any help!
I can't afford multiple fishfinder units for my boat. Does anybody have suggestions how to setup where one unit can be moved from the "captains" chair to the bow?? I plan on being able to move the transducer as well. Thanks in advance for any help!
You might try an ice fishing rig and make a pole for the transducer. I would reccomend sticking with a unit on a RAM mount at console and transducer mounted in rear of boat.
It would be a lot easier if you could get two transducers then you could just disconnect and reconnect the wires. If one is your only option I’d look the advice crappielimits said
Sent from my iPhone using Crappie.com Fishing mobile app
I have one unit mounted in front of boat, yes it's hard to see from drivers seat, might be better mounted more in middle of boat. I have a transducer on back of boat, and one on the trolling motor. I purchased a selector switch and a y cable from hummingbird to choose which transducer I wanted to use. FYI, the selector switch draws a little power from battery so in down time I hook a battery tender up to keep battery fully charged
I would take a look at the techniques the Kayakers and Ice Fisherman use it is slick. The transducer is mounted to a piece of PVC with a clamp on opposite end. The head unit is portable....Now I just did a quick search and come up with these two concepts from google or googling whatever they call it nowadays...….you will figure something out
I had 2 gimbal mounts and transducer on trolling motor, just left the wires long enough to move back and forth in wire loom. Worked great but could be a pain if moving alot. Now have 2 units on boat
I use a Humminbird 175 on the front with the transducer mounted on the trolling motor foot and a Humminbird 688 in the rear. The 688 is DI/GPS and works great with good imagining, the 175 works fairly well but small, not quite as easy to read but works for me..
Unless you need a DF at the helm to use for navigation purposes ... you "could" get away with one at the bow & have it be big enough to be seen from the "captain's chair".Quote:
Originally Posted by captdave
I used to have one at the console & one at the bow, but the console unit went wacky on me, so I unplugged it. I fish familiar waters, so navigation isn't a problem. I fish from the bow, so that's where my Hook 7 unit is mounted. If necessary, I can turn the map feature on & use it for navigation on unfamiliar waters, as I can see it from the driver's seat. I did exactly that when I had the Lowrance Elite 5DSI unit at the bow. The Hook 7 is nearly the same unit, just with a larger screen & 2d/chirp imaging added (which I seldom use).
I would do this^ with a hummingbird you can get a remote and change the screens if need be from the console. Even now with a bow and console unit I still use the bow unit from the console with the remote. The remote ill allow to most of the popular functionsQuote:
Originally Posted by CrappiePappy
I've got a Helix 8, I can use it up front with the trolling motor Mega DI+ transducer, or disconnect it and use it at the rear with the stern mounted MEGA SI+ transducer. Absolutely love it. With the new Terrova and iPilot Link I rarely sit up front anymore.
With a Ram mount and Humminbird's easy connect/disconnect plug, it's so easy to move from front to rear.
Check out Fish Finder Mounts .com. They may have your solution but are a little pricey. I have one and love it!