here it be.
Attachment 312666
not the best job with MS paint app
Printable View
here it be.
Attachment 312666
not the best job with MS paint app
link to relay description on ebay....relay ckt is on side of the relay housing that coinsides with the above drawing.
Ford GM Chrysler Sealed Waterproof Relay RY-116, RRY116GS, RY116T | eBay
SPDT Medium Duty Toggle Switch Center Off 844632075476 | eBay
the switch is on/on center off momentary. This is just a reference picture. The switch only operates the relay and only requires about 100 ma of current (.1 amp). Pick what U want with the spdt center off type switch.
Very cool Cane Pole. I assume the constant on is forward and the momentary is reverse. Can you show us the pin out on the relays so we can better understand this circuit. Thanks
The schematic is on the relay including PIN numbers. The switch is center off and has two "on" positions. One position operates One relay and the other position operates the other relay.Quote:
Originally Posted by N2Crappie
Sent from my iPhone using Crappie.com Fishing mobile app
Hard to draw a schematic on my phone,but not impossible.Quote:
Originally Posted by Cane Pole
Sent from my iPhone using Crappie.com Fishing mobile app
What is the purpose of this CP. I think I missed something.
I would imagine to be able to back up without turning the TM 180°. Now I want to see how he adds a new button for it on the remote. How is the thrust going backards Tom?Quote:
Originally Posted by wilbur
The circuit was requested by another member
Sent from my iPhone using Crappie.com Fishing mobile app
I sent this circuit to Jerry Blake a few
years ago. He used my circuit to control a transom mounted troll motor to control the position of the rear of the boat. The was mounted at 90 degrees to give aft of boat left/right control from the bow. It worked good for him
Sent from my iPhone using Crappie.com Fishing mobile app
I wii do a real schematic diagram when I return home.
Sent from my iPhone using Crappie.com Fishing mobile app
Here is the schematic of the Trolling motor reversing circuit I just drew up (again). Can't remember what I did with the last one. This application can be used in many places. Use it in conjunction with a gearhead motor and you can make a lift for your trolling motor.
This circuit provides electric braking. If you want the motor to coast, you add another relay with 2 diodes. Simple.
This is a gotta have circuit for power hungry folks like myself. Too lazy to do it by hand, just push a button and walla!
Attachment 312901