Hey guys here's some pictures of the slow process of my latest boat project.Attachment 308051 interior was rough, boat sat out in the weather its entire life.
Attachment 308052 I took all the flooring out,welded in some 3/4" tubing for extra bracing for the new 1/8" aluminum floorAttachment 308053
Attachment 308054 added a tackle box and sliding doors at the rear. I made a built in tackle box for the console. The exterior was faded bad and the graphics were cracked up so I decided to paint it. Boy was that a big job getting the graphics off. I used a heat gun and several different solvents to finally get them off. This was the toughest job of the project.
Attachment 308055.
Every hinge on the boat came pop riveted to the compartment/ door and every one was broke when I got. ALL doors/ hinges now are attached with 10-24 SS screws and lock nuts,Attachment 308064
Attachment 308056
The exterior has a bit more shine to it now
Attachment 308057
The interior has new carpet on the console and storage compartment/ shifter areas. The bow is painted diamond plate aluminum and the floor is the foam mat stuff. Rod holders will be next.
Attachment 308061
Here you can see the tackle box in the console. I added a little door and storage under the bow, left the door unpainted and tried to polish it up a bit.And the next pic you can see the under seat storage and the tackle box at the rearAttachment 308062Attachment 308062Attachment 308063.
