Printable View
I decided to try a small local lake today. Backed boat in at 4 pm and kept a limit by sunset . Used same Todd Huckabee Rods and 1/4 oz jig heads rigged with orange/chartreuse 2.5 '' little hustler tubes by Southern Pro Tackle . No net used as usual just swing them in with these tough graphite rods .
Attachment 297903
Nice job!
You da man! Way to go !
Thanks Nimrod.
Beautiful picture
Nice catch thanks for the report.
nice to see you are back to giving good reports !! Nice catch and thanks for the report....
Awesome!
Sent from my iPhone using Crappie.com Fishing mobile app
Nice catch.
Sent from my iPhone using Tapatalk
Awesome....some day I hope to figure this out😎
Very nice CA!!
Sent from my iPhone using Tapatalk
Nice mess. Looks like some biguns.
Which one of the Huckabee rods do you prefer?Quote:
Originally Posted by NIMROD
I’m planning to stop by Grizzly Jig next week on my way to St Louis, considering the Pro series rod and the dingo rod.
If you like shorter the meat dragger is fine . The pulling pole is good for a little extra length . The Pro series rod looks the same as pulling pole but has about 15 small eyes , great in the wind but a pain to thread line through that many eyes . I have all three . We have never netted a fish using these rods but do have to lip big Catfish . :biggrin I would buy the pulling pole , I have trouble threading the eyes because I have bad ( old eyes ) ones myself . :twocentsQuote:
Originally Posted by warhawk
Attachment 298037
Attachment 298042
Here is 7 that weighed 14 lbs out of a stringer we caught a couple weeks ago and never netted a fish .
Thanks Nimrod, I don't like those micro guides for the same reason, plus they don't work well with bobber stops.
Nice catch. I broke a pole a couple days ago so thanks for the pole review.
I was swinging in one a couple of weeks ago, about 2 lbs, and made the mistake of reaching my hand up the rod and lifting just a little to get it over the edge of the boat and that rod snapped instantly. So don't do that, keep your hands on the handle. nonono
Quote:
Originally Posted by Mac Daddy
I have used all kinds but yes rods are designed to bend in an arch , if you grab up towards the end not much room to bend without putting a bad angle . I have swung lots of slabs with these Huckabee with no problem . No rods will hold up with a sharp bend if you load them up too much . Never lift on a sharp vertical pointed rod , let it bend , just not all on the tip .:twocents We don't carry a net , ask anyone I have fished with . Swing with steady pressure and using bigger hooks we lose less fish than most using a dip net . :fish
Man those are some fat crappie. Nice work.