Printable View
I need to make a run from my house to my shed. I should be using some # 8 wire. I have an abundance of # 10 wire. Can I join two lenghts of # 10 for each leg to gain capacity? In other words I will have 2 wires for the line, 2 for the common, and 2 for the ground, each set joined at both ends.
"gene"
Send Speck a PM....he is a electrician
Sent from my SAMSUNG-SM-G891A using Crappie.com Fishing mobile app
Electrically, multiple smaller wires in parallel act as one larger wire. Your question becomes a legal issue, not a electrical one. I suspect that it's NOT allowed to parallel multiple smaller wires and then assume the whole is rated for the sum of the currents of each of the wires. Check the local code. Varies by jurisdiction.
The problem I would find in that is the case is that one of the conductors becoming disconnected causing overheating in the other conductor.
What Randy said.....my concern is....you wrap the two ends together and say you leave a single tag end to connect or wrap around a screw or what ever....then that connection would be the weakest link and you could have a heat problem. I would recommend going with the 8 guage wire. This is going to be connected to your house and you do not want to put itin jepardy. What your saying might work....but its kinda like stealing chickens....that works pretty good sometimes untill you get caught
It is not legal per the NEC. Article 310.10. Wire must be 1/0 or larger to installed in parallel. With that being said, theoretically it gives 60A capacity. Me personally, I'd stay away from it.
Thanks for the input and concerns about the safety of doing it that way. The problem is solved as a friend told me about an hour ago that he had the wire that I need and it’s mine for the taking.
“gene”
Sent from my iPhone using Crappie.com Fishing mobile app
Ironically I did this on my boat. I had some #10 wire and realized it was not enough for my TM so I ran a parallel #12 with the 10. Have not shorted out yet, but the day is young.
I'm sure you got that solved PPG. I wuz thinkin you might sale some beets and buy the correct wire.:biggrin
Your boat is DC SR. PPG doing AC. If You got a quality breaker on your TM it should protect you.Quote:
Originally Posted by SeaRay
I was curious of the Amperage needed in the shed. A # 10 wire is good up to 30 Amps depending on the length of the wire. Enough to run a freezer and lighting or an Air Conditioner.
What size/type air conditioner?
I branch off with 100 amp sub panels, currently have four (4) off the main with 200 amp service. I don't size the power requirements at each end of each appliance, I deliver the power. In that manner, what ever you plug in works. Don't size it "just right" to run an AC, freezer, etc. in your shed. Do it right, or don't do it at all.
Sorry it took so long to get back to this post. Right now I can run anything in my shed on a 12 gauge extension. That is if I run them one at the time. When running my wood lathe I also need to run my exhaust blower which is my dust and fume remover. I'm can just get by with those two at one time but I'm at capacity. I hope to get with my friend this coming week to get the spool of wire he has.
"gene"