Printable View
As I flounder (actually crappie) to learning more about my gear I want to use the Helix 10 with my Ulterra in a connected manner. As I looked at the screen showing what is connected I found the Minn Kota is listed as “off.” How do I toggle this to “on” so I can use functions like “contour following” with my two pieces of gear? I realize this is probably a “duh” question but I always seem to get super insight with you guys responses.
Sent from my iPad using Crappie.com Fishing mobile app
Do you have the cable from the Ulterra connected to the Hellix? The menu for connected should show connected or unconnected not on or off. You need to open the ipilot setting menu and turn on the ipilot navigation menu for the link to happen.
First off, do you have the Ilink, if not there is no connection.
You are right, of course, and the menu says unconnected. I do have the cable connected from the Helix 10 to the Ulterra. I will search more and thanks a bunch.Quote:
Originally Posted by madmax
Sent from my iPad using Crappie.com Fishing mobile app
Is the link software or an existing menu that is not toggled on? I really appreciate you taking the time.Quote:
Originally Posted by Rees Guide
Sent from my iPad using Crappie.com Fishing mobile app
The Ilink is part of the Ulterra, either you have an Ulterra Ipilot or an Ulterra Ilink.
If you have the Link then it has a connection cord coming from the trolling motor which you have to buy a dongle to attach it to the Helix. Once that's done you may have to go into the menu on the Helix and look under Network and turn on the Link. I do not remember having to do this with the trolling motor but had to with the 360.
I will check. I did have the cable already from the Ulterra that I connected to the Helix. Did not know about your following instructions so will follow up. Cannot thank you enough.
Sent from my iPad using Crappie.com
Maybe a dumb question but did you turn the ulterra on
Well, guess I am dumb as dirt. Followed instructions and in menu shows iPilot unconnected. Could not find a network menu or i-Pilot setting toggle.
Sent from my iPad using Crappie.com
Oh, and yes the Ulterra was on, deployed and operational. Not a dumb question and I was lucky to think of it.
Sent from my iPad using Crappie.com
Ok—I am going to confess here and post a more complete explanation on bathe main forum. I have the ultimate Minn Kota Ulterra (2017 model) with spot lock, cruise control, auto deploy and retrieve and more functions than I could possible master. BUT it has iPilot and not iPilot LINK therefore will not habla with my Helix 10 Mega everything! I am so dumb and feel bad about taking up your well intentioned and valuable time. Guess my handle should be DUH.
Sent from my iPad using Crappie.com