Here is two of the first jigs I’ve tied. Any helpful criticism. What I did right and what I need to do better. I’d appreciate it thanks Mike Attachment 284491Attachment 284492
Sent from my iPhone using Crappie.com Fishing mobile app
Printable View
Here is two of the first jigs I’ve tied. Any helpful criticism. What I did right and what I need to do better. I’d appreciate it thanks Mike Attachment 284491Attachment 284492
Sent from my iPhone using Crappie.com Fishing mobile app
Looking at the picture I can already see a few mistakes the green is past the thread on the head.
Sent from my iPhone using Crappie.com
I always try to use the same color of thread as the color of the body. They both look good to me.
Good ideal thanks
Sent from my iPhone using Crappie.com
Nice work. You are already deciding to make the next one better. Cool!!!
You're only mistake was not hooking a brother up.:biggrin
Thanks. It’s fun I was trying deer hair and just letting my son pick colors he enjoyed it.
Sent from my iPhone using Crappie.com
Now if it would just warm up so I could try them
Sent from my iPhone using Crappie.com
I like them both! The black one best. I care for the body wrap a little shorter, a little farther from the hook.
Looks great!
:fish
Looks great.Let the fish tell. Ya
Sent from my SAMSUNG-SM-J120A using Crappie.com Fishing mobile app
They look fine to me
They'll both beat the fish down.Quote:
Originally Posted by "G"
Sent from my iPhone using Crappie.com Fishing mobile app
Thanks
Sent from my iPhone using Crappie.com
Was the black/chart jig's tail made from belly hair?
Good start. Yes same color thread as body or head, I use body mostly. Then don't cut the ends of the tail so they are not natural looking. If the Pink one is marabou, you want natural looking tips and not looking so cut off. Enough for now.
Skip
So leave them uneven. Thanks skip
Sent from my iPhone using Crappie.com
Let me just post a picture of my little Marabou Roadrunners so you can see how I tie them.Quote:
Originally Posted by Mike1234
Skip
Attachment 284629
Ok thanks. Btw they look good
Sent from my iPhone using Crappie.com
Attachment 284637
Sent from my iPhone using Crappie.com Fishing mobile app
Yes, just watch the length and if you want it shorter, cut the end you trying in to cut. I like kind of a long tail personally and some like it shorter, but personally just don't think a little longer tail hurts anything when they are active as they will just inhale the whole thing. The way you have these now look more natural and will swim with better action!Quote:
Originally Posted by Mike1234
Skip
I’m have a hard time trying to fight out how long and how much tail to use. I look at some jigs and there is very little on the tail and they look great. But when I try to put smaller amount on tail they don’t turn out that good. But it is fun learning to do it. I’ve watched a ton of YouTube videos on it.
Sent from my iPhone using Crappie.com
Look at some of the lessons on FAOL! I know there are a lot of videos and they are easy to watch and all that, but the guys on FAOL have been tying flies for many many years and know what they are doing for sure! It's all reading and looking at pictures, but it's really where I learned most of my tying from as the videos were not around back when I learned and really I still think that is the best way! I know t's a bit different, but they tie in chenille and hackle and all kinds of materials and if you learn it there, you learn it the right way. Just my 2 cents!
Click on Fly Tying, then Beginning, and you can probable skip a couple of there first parts as it's about tools and such. Later look at the Intermediate and finally the advanced tying.
Fly Anglers OnLine, Your Complete Internet Flyfishing Resource.
Skip
I found that online the other day was reading threw it. Lots of great information.
Sent from my iPhone using Crappie.com
Good job, practice makes perfect, but the crappie are not as critical on workmanship.
I'll try to tell you how I collate the hair, or 'bou that I make tails with. Pull what you want to use and hold the bases of it in one hand, tips exposed. Now take the other hand and grab the longer tips of a few that are longer than the others and pull them out. Lay them in front of you, and repeat the process, laying the tips together so that now the butt ends are uneven. When you think you have enough to make a good tail, pull just a little more. It's easier to remove or not use some than to go back and get some more. Now pinch all of it together and hold the tips and middle in your off hand and take you scissors and trim the butts even to the length you want to use. As you pinch it to the shank and throw a couple of wraps around it, don't pull it tight just yet, you still have to check for even coverage. As you make sure that it's spread evenly to your taste, slowly pull the thread tighter and it will rotate around the shank as you do. Normal stuff. Now make sure the butts are where you want them to be, whether up against the head or wherever you choose. throw another 4 or 5 wraps and then a half hitch or two, and complete the collar or add the chenille or whatever. My preference is a collar about the size of the head in length, which eliminates the long skinny collar look and gets lots of action out of the tail material. Along the way, check to make sure that your wraps are tight enough by tugging a little on the tail material. If not, go a little tighter on the next one. You do good work and your jigs will catch fish, this is just some input to hopefully shorten your learning curve. I have tried hair stackers to achieve the tip alignment I speak of but it hasn't always done what I need and this works with any material. Keep us posted as we all learn form each other.......Skeet.
Thanks skeet.
Sent from my iPhone using Crappie.com