Printable View
Bought this card used and put in my Helix 9 which as I understand is supposed to automatically recognize card is there and come up in charts/view. Well nothing happens when inserted but if installed in my Lowrance HD7 touch it comes up no problems, any ideas anyone?
Are the Chart views available in the view rotation when inserting the Navionics card ...??
Will the unit recognize the Navionics card when the unit is in Simulator ...??
Rickie
Check lock switch on card
Sent from my iPhone using Crappie.com
chart views are not available in views mode.. have not tried simulator mode will do it later this evening..
I was thinking about splurging and getting a new helix mega DI when they come out and other nite was thinking, will my navionics map card enter change with Lowrance units it is already used on, and been reading, if it's used in a helix 9 first, and a setting in the helix hasn't been set to read MAPS it would corrupt the card to not read in a lowrance unit or switched back and forth. Also found similar reads googling other fishing forums, same problems with commenters calling hummingbird and both lowrance and their final comments were, it's a Navionics thing, to sell more map cards. I am just posting these comments as I am still reading before I take the plunge and get another Unit and invest in a new Helix mega DI when,they come out as Lakemaster doesn't have a couple of lakes I fish here in Indiana and still would like to be able to swap the card in and out of my Lowrance SI and a new Hummingbird DI as well. Hope you,figure it out and I will keep reading about swapping cards, but it's maybe a thing where if first used in a hummingbird, then it won't read in a lowrance. Does anybody out there, change a navionics card between hummingbird and lowrance fishfinders without any problems?
Then again, I,read where both diff. Fishfinders will read a Navionics card. Here is some instructions from Navionics for Hummingbird card use.
https://navionics.secure.force.com/k...mminbird-units
I chatted with Navionics, and Navionics updated map card is swappable between my HD SI touch 7"and a Helix Mega 9 so I will wait to see when HB comes out with their Mega DI units this fall.
will try what it says in your link, according to what I had read it was supposed to automatically recognize it and come up in chart view..
[QUOTE=cevans;3484738]Then again, I,read where both diff. Fishfinders will read a Navionics card. Here is some instructions from Navionics for Hummingbird card use.
[URL]https://navionics.secure.force.com/kb/articles/en_US/Knowledge_Article/Plotter
will try what it says in your link, according to what I had read it was supposed to automatically recognize it and come up in chart view..
[QUOTE=cevans;3484738]Then again, I,read where both diff. Fishfinders will read a Navionics card. Here is some instructions from Navionics for Hummingbird card use.
[URL]https://navionics.secure.force.com/kb/articles/en_US/Knowledge_Article/Plotter
Chart views not being available means the unit is operating in Normal mode but the GPS has not connected to the satellites ...Quote:
Originally Posted by dbowling
Allow the unit to fully boot with an open view of the sky ... and wait for the Chart Views to populate in the Views tab - or the Chart and Nav tabs to appear in the Main Menu System ...
Then try the Navionics card ...
-----
-----
Or boot the unit in Simulator and try the Navionics card when the unit "simulates" GPS satellite connection (same deal - wait for the Chart Views to populate) ...
Rickie
The same Navionics card works in both my HB's and both my Lowrance Touches ...Quote:
Originally Posted by cevans
Rickie
yeah when I
yeah when I was trying it today it was inside my pole barn so no GPS reception, never thought about that.. but couldn't get it to recognize it either the other day when I was out on a small lake.. will try it again this weekend..
was trying it in my pole barn today forgot about the GPS, will try again this weekend.. did have it out on a small lake locally that is on the card a couple days ago and it wouldn't load then though, but it did in the HDS7.
[QUOTE=rnvinc;3484838]Chart views not being available means the unit is operating in Normal mode but the GPS has not connected to the satellites ...
Allow the unit to fully boot with an open view of the sky ... and wait for the Chart Views to populate in the Views tab
for some reason my post are not showing up when I hit submit but do after I repost, then it will not let me edit my post to have them deleted..
Quote:
Originally Posted by dbowling
I've seen a few of those in recent days ... (a couple with my own posts) ...Quote:
Originally Posted by dbowling
Must be a glitch in the forum software ...
Rickie