Printable View
I can't justify spending the money to get Denali rods, but really like the white color for the way it stands out against the water in a spider rig setup.
I see that some of the B'n'M rods have a florescent tip ... but I like the idea of the whole rod being a color that stands out good against the water.
I see that Mudhole has some paint designed to be used to paint a rod. Wondering how a paint job stands up to flexing etc on a rod.
Crappiemaniac on the MS board painted some white.....think he used Krylon paint its supposed to flex. I have used Krylon to paint my tips before and it worked ok. You can get it in spray cans at walmart. Take one of those green scuff pads to prep the rod before you paint.
Did he post about it? Any idea how long ago that was?
Yes he posted on either ms main board or ms ot about it been over a year ago.......just send him a PM a d ask about it. The tips sections that I painted on my rods was about 6 yrs. Ago.....paint held up good. Faded a little now is all.
What kind of paint did you use ..... never mind I missed in the first post where you said you had used krylon.
Sent him a PM
I use Krylon fluorescent paint and it does well. Been on them for years and still looks great. I base coat with white, it really makes the fluorescent pop.
:popcorn
Back in the day I've used cheap rattle can paint to paint the tips white for using at night with black lights.
Found his post .... it's over here. http://www.crappie.com/crappie/off-t...-crappie-rods/
We painted the end of a bunch of cane poles many years ago when we cat fished with bank poles......Used florescent paint and they lit up real good with a spotlight.Quote:
Originally Posted by FurFlyin
I've painted several rods for people when building custom rods.
If a rod has a shiny or smooth finish you need to take that off. I typically utilize 220 grit sand paper to take off the sheen and then finish it off with 400 grit. After sanding I'll utilize denatured alcohol to remove any residue. Remember, light sanding only. You only want to take off the existing finish and not dig into the rod blank.
All of mine have been done on the blank only without any guide eyes. I purchased many rods from garage and yard sales, brought them home, stripped off the guide eyes, sanded them, painted them, put new eyes on and then donated them or given them away to people.
Rattle can pant is all that I have used. On a two section rod, I use a sacrificial end piece to fit in to the top section. I built a wire type stand to hold the bottom while I paint the top. This sacrificial piece allows me to paint the upper without having a paint ring on my "real" lower. On the lower, I use a stand that has a hole bored in it to hold the but section up. I then paint the lower after I tape off the handle (if one is on it). When Fitting the two pieces together, I sometimes need to lightly sand the joint.
For finish, you can leave just the rattle can paint expecially if using High gloss. I have not seen any cracking issues with it. After putting the eyes back on I will also use some furniture paste to bring out a nice shine. We have also been playing with a new product (an epoxy) that you can coat the entire rod with. Very light weight product, looks really nice on the rod but... It is a ton of work.
Another option for people interested: Photoluminescent paint. They also make tape if you want something quick. With photoluminescent paint, it will gather light from the days sun and then glow in the dark. The good stuff will glow for 8 hours or more.
WOW! I just built a rod building jig, gonna try my hand at redoing some this winter. Assuming we get a winter, and I'm not fishing!
Some great info there!!Quote:
Originally Posted by wicklundrh
Sent from my iPhone using Crappie.com Fishing mobile app
I recommend the "Get Bit" series on You Tube put on by Captain Kevin Brotz. I think it is a 12 video series and he goes through everything from start to finish. Probably the best one I've seen out there.
I promise, in short order you will be rebuilding all of your rods, ordering new blanks, finding them at garage sales... it is addicting and a nice way to pass time in the crappy winter months or when it is pouring rain outside.
Like G mentioned use a paint designed for plastic as it will flex with the rod ...
Attachment 273896
My Wally Marshall's have been painted about 15years now without a chip one ...and I only prep with acetone (just damp not wet) ...
Rickie
:hesaid Got the same paint from Walmart. Mine was red paint on sale. I painted about a foot of the rod red, including tip and the line rings. No special prep except damp paper towel wipe down. Beauty is in the "eye" of the beholder.
Four of my most used crappie rods have the tips painted. I did this because my eyes are not what they use to be and I wanted to differentiate between which rods were being bit.
I went to a craft store (Michaels) here and picked up a set of fluorescent colored paint, under the name "Testors". This selection had various colors in it. I selected the green and yellow chartreuse. What I did with these B n' M rods was to use a 3/0 steel wool to "roughen-up" the surface finish of each rod. I did this to about the last 8" near the tip top.
Then I used a craft paint brush and coated the roughened section with a white base coat. I let it dry overnight (very important!). Then I applied the color over that and let that dry overnight as well.
Finally I got a bottle of "Hard As Nails" clear nail polish (Sally Hansen) from CVS. This I coated over the painted section on each rod. Have had these rods in use for about 3 seasons now and though they may be a bit "scuffed" in some small areas, they all look and perform their functions just fine. No problems, no worries.
Not hard to do and it has made a significant difference in my perceived strike reaction time. JMO! :)
I took a brand new Remington pump right out of the box many moons ago and gave it a camo job with flat finish Krylon and it still looks like I did it yesterday 20 plus years later. good spray paint for sure , painted an entire 57 chevy pick up with about 20 cans back when I was late teenaged crazy as well ...AND it looked right nice in a flat black with silver and blue flames .....:Rofl
so in synopsis I would say it should work well on a fishing rod ......:crazy:
I used fluorescent marker paint, it started chipping off after a couple of years now it needs to be repainted.
Thanks.....good to know the bad too
Sent from my iPhone using Crappie.com