Printable View
Ive always fished single pole over brush tops mostly and have recently started spider rigging some and was looking for some tips and advice y'all may have. I've only tried it on grand bayou in coushatta and was wondering if anyone has tried it in the oxbows on the red river
I don't really spider rig much but I'm sure a few on here will chime in soon. One tip I would give you is one you probably already know, set out different rods at different depths until you locate them and then go to that depth with the other rods.
Thanks I appreciate it, still trying to learn it just been playing with different size weights and Speeds but didn't know what worked the best.
I'd do a search. Not many post from the red River oxbow's. The Mississippi board has a post now about spider rigging with a float.HTH
Thanks I'll get on there check it out!
l mainly use a 1oz weight on all my rods for the fact if u need to speed up you can keep your bait in the strike . a guide to go by is in colder water go slow say .3 -.5 and as the water gets warmer you speed up .5 -.8 .. and in the dead summer you can power troll move up to a 2 or 3 oz weight and run .9- 1.2 .
Sent from my SAMSUNG-SM-G891A using Tapatalk
Thanks that helps out a lot. I'll have to give that try next time out.
if i can help anyway let me know !!
Sent from my SAMSUNG-SM-G891A using Tapatalk
You could also try a double dropshot rig with shiners and move along pretty slow.
I sure will thanks again man!
Last time I went I tried that and was playing with weights. I think my weight was to lite and I was moving a little to fast lol. Have you ever tried it with a minnow and swimming a jig?
Matt, I also would rather fish pole in hand but I had to adapt to getting used to spider rigging to and I can tell you that set-up means everything. I have had several different set-ups and by far the rig I have now is set up the best to suit my needs. I can easily switch from seating one person up front to two quickly with my Dub-l-Seat, and I have the Driftmaster Crappie Stalkers which are the individual rod holders. The plus these are they are each independent on its own so its easier to detect a bite and it does not disturb every other rod when you do. Buy being independent you can make slight or rapid adjustments on depth to individual rods quickly. If I want to remove the uprights from the deck its simple and quick and easy to store away when I want a clear front deck.
Once your set up correctly you will need to find the right depth and speed at which to fish. This may be at a snails pace or at a pretty good clip. Weight will be your deciding factor in keeping your lines vertical at all speeds and your rod tips evenly arranged to detect the slight bite. It takes a bit but you will get the hang of it. Capps and Coleman double minnow rigs come in several weight ranges and this is your best bet for fishing live minnows, when fishing jigs I go down to a single jig and have recently went to using the rockport rattler which I really like. Getting into a routine is the hard part, once you get that down your good. You will need a good net with a long handle, check out Jenko Fishing they have about the lightest net on the market and they are good folks. Hope this helps, I'm sure some real riggers will chime in but time on water will be your best teacher. Good Luck and if I can ever help ya, just holla!
I tried that the last time I went, and liked it. Im ready to hit the water and give it another try
Thanks for all of the info that helps out a lot. Last time I was playing with different weights to see what a would work best and I can see where you would one to stick to one to make all of your rod tips be the same. I missed a few fish by having them all a different heights. I'll have to check their nets out I can tell my regular net isn't going to cut it lol
One mistake(to me) many make is having their rods tips too high off of the water. I find 1 foot about ideal. You can detect bites better. If too high you will miss light bites or pick em ups.
Sent from my iPhone using Tapatalk