Printable View
It has been a while coming up with a design that would hold my poles in the space that I had and make it where they were easy to get out and put back . I think this will work, I also made sure I had room to add a few more !!!https://uploads.tapatalk-cdn.com/201...bd957734a3.jpghttps://uploads.tapatalk-cdn.com/201...c876569604.jpg
That looks good. One can never have too many rods or too much room to store them.
Nice!!
Sent from my iPhone using Tapatalk
Looking good!!
That's neat !!
Looks good Bro!!!
Cool idea
Very nice!
Nice job and looks great. I used decking screws on my walls and hung the rods on the long screws because I didn't want to lose that much distance off the wall. Your shop is probably wider than my 30' tho. Again, nice job. [emoji1303]
BRM
Great design.
Very nice work!
I cut a trough in a piece of 4" pvc pipe, and have tie ropes on each end. Lay the long trolling rods in there and I suspend them from the ceiling on eye bolts that are anchored to joists. I would hand my 18 ft boat duck blind from it during the off season, so it's perfect for my trollers rods.
Sent from my SM-G900V using Tapatalk
Nice job! I like the idea and the ability to utilize the space
Sent from my iPad using Tapatalk
looks good
Did you get a patent on that design? Cause I think I may copy it. Looks good!
Sent from my iPhone using Tapatalk
Go ahead , I cut the boards 18 inches and spaced the grooves 2 inches apartQuote:
Originally Posted by Iwannafish
Everything was cut on a 30 degree angle. I used a 1/2 inch bit in my router to make the grooves and a 1/4 inch corner round to finish it up.