Attachment 265022Attachment 265023
Would like to put some kind of door up, mainly to block noise. Open floor plan from kitchen to eatin, to living room.
Barn style rolling door has been ruled out by mama
Printable View
Attachment 265022Attachment 265023
Would like to put some kind of door up, mainly to block noise. Open floor plan from kitchen to eatin, to living room.
Barn style rolling door has been ruled out by mama
What about one of those sliding pocket door that slides back into the wall? Never installed one so nut sure how much hassell is involved.
Sent from my iPhone using Tapatalk
I think you are referring to a "pocket door". Based on the photos and how close the other door frame and the wall is to the exiting opening, it doesn't look like there would be room. I'd just install a door to match the other interior door. Pretty straight forward to do. My 2 cents anyway.Quote:
Originally Posted by Jman5626
Pocket door would be problematic.... Would require slot of demolition and rebuilding wiring. From what I see here in the pictures provided there probably isn't enough wall space for a pocket door to slide into the wall. It appears as though you have about a 36 inch wide opening and if you're handy with tools, there would be plenty of room to install a hinged door from kitchen into laundry room.
The proper hinge side of door should be on left side of opening and swinging into laundry room with the doorknob on the right-hand side. However.... From the pictures provided it looks like the refrigerator would be in the way of the door knob. So the solution would be to hinge on right-hand side swinging into the laundry. This would only create issues primarily from a convenience perspective as you would opening the door across direction of travel towards the center of the laundry room instead of towards a perpendicular wall as is common.
Sent from my XT1585 using Tapatalk
There is always Bi-Fold doors, fold in half when open.
Yes a bi- fold door is an economical and simple solution and are easy to install. But...... Bi-fold doors do not operate from both sides of the opening that's why they are used for relatively shallow closet openings. Not pass through situations.
Sent from my XT1585 using Tapatalk
:hesaid Agree with Dgood 100%. Can your fridge possibly move back a couple of inches? Doesn't look like it would take much to clear the door knob and leave a little knuckle room. I realize there is a water connection back there so it may not. If it does you would be in business.
Can the fridge move back? Yes, then the freezer door will not open all the way.
A traditional door would be easiest, wife hasn't completely ruled that one out.
Thank you all for the replies! Keep the ideas coming!
A Accordion door would be the easiest way for you to go and they make them at what ever price you want to pay. You can find them at just about any hardware store like Lowes, Home Depot, Walmart and online at several places. I seen this one and it looks pretty stylish on amazon.
https://www.amazon.com/Flexi-Space-4...ccordion+Doors
https://images-na.ssl-images-amazon....3L._SY450_.jpg
Scrat that's a very good option. I never even thought of it as I haven't been real impressed with them in the past. Most all that I've been exposed to were several years old and I was replacing them with bi-fold doors. Not real sure how much noise reduction would be there.
Sent from my XT1585 using Tapatalk
I am on the thought of a solid panel bi-fold. I did a bunch of different doors when I was a wood butcher. Hanging a slab in that existing hole can be problematic. I would remove the casing there already and hang a pre hung door in it's place. Better chance of matching the existing doors throughout the house.
:hesaid Or, custom build a new home with way too much square feet and get all the bells and whistles...sorry. not helpful. Solid pre-hung door opening into the laundry room seems like a great solution given the refrigerator extending into the doorway. Good luck!
No more moving! Done enough of that. This doorway is my biggest complaint with this house.
Wife is looking at the link for that acordian door, thanks. Don't want a sliding door as our bedroom door is 34" to the left of this door. Plus when open it would block the switch and outlet you see in the picture. Theirs also a smoke detector that would be blocked.
If anything gets done, this would be a great weekend for it. Calling for 2-6" of rain.
The struggle is real
Sent from my Z959 using Tapatalk
Yep.... looking like a door to swing into the laundry, on the side there by coat rack.... same money and leave the door knob off so it does not bang the refrigerator. Then you can grab it through the hole...LOL
I'd slow your wife this thread so she starts to think your ideas are good ones!
they gave you some good tips hows about an overhead door or blue tarp JUST JOKING :Rofl:Rofl
You can put a bi-fold door in and put a small knob in the center inside of door to open from the inside
I pretty much agree with these comments. Couple of things to remember....measure your current opening to verify if it is a standard door opening....if so, then you are OK.....otherwise, the door will have to be custom built or the opening will have to be modified....if the opening is a standard size opening, I like the idea of buying a pre-hung door complete with door attached to jambs....if you decide to keep the existing door jambs & trim so that it matches existing wood in the room, then you have a serious job of buying just a door and notching the existing wood for the hinges...personally, I would not tackle this....to much alignment to do....to much to go wrong....OK, so I like the pre-hung door....only thing is, you have to stain the new jambs to match the existing wood, or, try to talk your wife into living with a painted door, jambs and trim....you can remove and re-use the trim around the door but be very careful not to damage it...so, hinges on left side, swing door into laundry room, move refrig to make room for knob....also your main purpose for the door is a sound barrier....none of the other doors will give you that....use a solid door...maybe even consider an exterior door that comes with rubber seals around the top & sides and add a seal on the bottom...last, get a door and frame that is solid wood....stay away from any particle board wood that screws will work loose...if you are going to do the work, make sure that it does the job you want....seems like a simple job but a lot to think about....good luck...Quote:
Originally Posted by dgood1158
Just my opinion, in your case a sliding barn door is ideal. Nothing swings in and out, nor door knobs to deal with. Here's one I put up. Rude and crude I know, but likes such things:
Attachment 265433
Built it myself, but I'm sure a certain number of folks can fashion something to suit your wife she might like.
The sliding door would appear to be easiest. Problem is it would block the light switch, outlet, and smoke detector when open.
Update: she's scrapped the door idea. Too many issues. Instead said start pricing a sound bar for the tv.
Thanks for all the input!
Saloon doors maybe?