My soon to be daughter in law wants to buy my son a custom rod and reel for his wedding gift. She wants something nice with their wedding date engraved in roman numerals. I told her I would ask you all for advice. PM me with your suggestions. Thanks
Printable View
My soon to be daughter in law wants to buy my son a custom rod and reel for his wedding gift. She wants something nice with their wedding date engraved in roman numerals. I told her I would ask you all for advice. PM me with your suggestions. Thanks
:ThumbsUp
That is a really neat idea
Most rod builders can print a label and epoxy it to the blank above the fore grip it's fairly simple. I always liked doing a thread weave better but Roman script would probably be both difficult and expensive. Expensive even for a custom.
There is someone on here who builds custom rods, has posted some pic's before, just can't remember who it was. He does some beautiful work. Hopefully he will see this and post up or some who knows who it is can give you info. What a great gift idea.
Thanks guys for the info. I talked to Ed Duke at Southern Crappie Rods and he told me it would be easiest to just get a rod I like and take it to a graphic artist so I bought one of his and there is a couple of them here in town. As far as the reel goes, I will get a nice one and take it to a jeweler and have it engraved
I don't know about "Easiest". For who? The person selling it?
You have to remember that a true "custom" rod is made for the person. It is in the length, style, weight, action, and color they prefer. It has a handle they want, with a foregrip they choose and a rear grip that is the right size and dimension and made of eva foam, cork, split grip, and so on. The eyes are made and selected to their specific style of fishing and the number varies depending on the style as well. They can be titanium to cheap boat rod eyes. Wraps are created in a color combination specifically for that person. Decals including fish, names, wedding dates, and anything else you can think of are added. Rods can be purchased in fiberglass, graphite, fiber graphite, glass composit, Torre Graphite, and many others.
When I build a rod I ask: What are you fishing for? What style of fishing are you using? How do you hold the rod? Where do you like it to sit in your hand and arm? What size reel do you use? What colors do you like? All of these determine the specific blank I choose, what type of reel seat I buy, the handle, the eyes, and so on. Did you know that most production off the shelf rods have an arbor created under the reel seat in order to build it up to affix it? Most of them are made with simple masking tape which deadens the feel of the rod? Most custom builders will utilize urethane or graphite arbors in order to transfer the feel of the bite, rock, or whatever, through the blank and into the reel seat and ultimately to the hand of the fisherman.
I think she has a great idea. If it were me, I would be utilizing our specific "Wedding" colors to have the builder use for the wraps. What does he like to do? Jig, dip lillies, cast jigs? All could be taken into consideration. Example: If he casts small jigs, a rod could be built utilizing "microwave" guide eyes which are designed to throw anything at much greater distances.
As far as a graphic artist. They are going to produce the decal. Are they going to install it, and then apply the coats of epoxy needed to preserve it? Do they have a rod turner to ensure it is a smooth even coat? Do they have an alcohol torch to ensure that there are no bubbles when the epoxy (known as rod finish) is installed? Are they going to utilize an epoxy that will not "yellow" or deteriorate in the sun? Are they going to apply the decal AFTER they wipe down the area with Denatured alcohol?
Can't find these at the corner store!
Attachment 261061
Attachment 261062
Attachment 261063
Attachment 261064
Attachment 261065
Attachment 261066
It wasn't me you were referring to was it??Quote:
Originally Posted by cray
As a custom rod builder I would agree with wicklundrh.
@wicklundrh
Your rods are beautiful! I would love to get one like those one day.
Sent from my iPhone using Tapatalk
Thank you. If your interested in a great hobby, it might be worth looking at getting in to it. Investment for a decent jig, rod turner, and tools is about 100 bucks. I recommend the youtube videos from Capt. Kevin Brotz with Get Bit Outdoors. I also recommend alot of the equipment he sells online.
Well my son is a generic fisherman. He doesn't target anyone species or has any one style of fishing. My daughter in law has a budget so I did get a top quality rod and got it in the mail today. I still have seven weeks to get the rest done. Thanks again.