Thinking of getting a Terrova with I-Pilot, I mostly Spider Rig or Longline, but would be fun to pull a crank once in awhile.
My boat is an oldie, 16' Bass Tracker Pro 160. Hoping to hear from some of you guys that have a similar size aluminum boat. Not sure if the 55# thrust, or if I should go for the 80# thrust?
Attachment 255447
This is an old photo, have done a few upgrades since, just wanted to show the boat.
Thanks and regards,
pescador
I had a terrova, I think 65lb not sure, had it on a Tracker 185, pulled cranks for long time, would pull the tracker 3.5 mph. I took it off and stored it in the garage... guess I should sell it.
Go with the 80 if you have room for the batts, you won't regret it I promise.
I have a 55 on my Wareagle about the same size. Works great rigging and long lining but even with 2 batteries only about 4 hr's pulling cranks. I use big motor to pull with 4 stroke. If it was me I would go with the 24/80 lb. not that much difference in cost but well worth it in the long run.
I bought a 24/80 for my 175 Tracker. I use 2 -29series batteries and have not run them down yet. It will pull 3.3 mph.
55 would be adequate & a 80 would be desirable. According to what your main style of fishing is. I'm running a 55 on a 16' fiberglass Nitro and it will do everything I need it to.
Cray took the words out of my mouth. I had a 16' aluminum and always wanted more TM on it. The Bass Boat I have now has a 70lb PD-V2 and I wish I had gotten the Terrova for the extra features. I have 2 - 29 series batts and have never run em down yet. What also never happens anymore is the wind getting the best of me. The motor will pull that heavy boat in wind past my comfort zone. Will make headway in a stiff wind with ease. The Terrova also deploys easier than mine. I strongly doubt you would be disappointed in the 80lb Terrova. I would get the foot pedal if I was to buy one. I might not use it often but want the option.
Hey, I got a 112 ILink with remote and foot pedal I will sell ya!!! Sure deploys easy!!!:biggrinQuote:
Originally Posted by skeetbum
Question:
With the 24 volt and two batteries, I would have to put batteries in the back, would I need heavy wiring for such?
No, on the heavy wiring. I have a 22 ft Excel, run a 112 Ulterra 36V TM.Quote:
Originally Posted by pescador
I'm wired with 8 GA wire, batteries in the absolute rear of the boat.
The TM draws 55 amps max and the wiring is good for 65 amps.
8 ga will be more than sufficient.
Sent from my SM-G900V using Tapatalk
I just researched a bit. The 80# thrust Terrova pulls more amps than my 112# so if you run more than 15 ft, you should move up to 6 ga wire.Quote:
Originally Posted by mervin
Here is a link to Minnkota's site.....
http://www.minnkotamotors.com/Suppor...ion---Rigging/
Sent from my SM-G900V using Tapatalk
Ive been asked many times at landing. I tell people dont go with a short shaft and low thrust to save a couple hundred as you will be happy you got a 80lbs on those really windy days or rough days. I have a 80# long shaft on my deep v 17.5' and wish i bought the 112
Agree. I went with the 60" 112 because of the rough water we experience in the summer with the wind, wake boats, and pleasure cruisers here around Nashville.Quote:
Originally Posted by micorps
Sent from my SM-G900V using Tapatalk
I have never heard anyone complain about having a TM that is too big. I have heard lots of folks (myself included) complain about one that wouldn't hold in the wind or current.
Just what I was hoping for, lots of great info here.:ThumbsUp
8 gauge will work fine. Had it on my old boat for a 24 volt 65# powerdrive. Moved motor to my new to me boat at 20'. Still 8 gauge but with the longer boat, if I run 80#, would probably run 6 gauge. At 16 feet, Your good with 8 and 80#.CF
I have the 55# thrust Power Drive V2 on my Tracker 175. Great TM BUT a higher thrust with a foot petal to go along with remote would definitely be better. I purchased a fish finder at the same time so an upgraded TM was out of budget. What Skeet said earlier was on point.
Perfectly said.Quote:
Originally Posted by Clint
X3!Quote:
Originally Posted by Spaceman
24/80 Terrova is what you need.
I'm in the market too. I've just about worn my old 75# motor guide completely out. Really been looking at the terrova 24/80 for a bit and just wanted to hear some opinions. Anybody have it with I pilot? Pros and cons?
I've had Terrova w IPILOT since they came out.Quote:
Originally Posted by blue-jig
Greatest thing since sliced bread, won't fish without one.
You aren't locked into the front of the boat, the boat runs itself while you set out rods, reel in fish, grab a cup of coffee.
Get one, you won't regret it.
I guide here in Nashville and have an Ulterra IPilot on one boat and a Terrova w/ IPilot on the other.
Nashvillefishingguides.com
Sent from my SM-G900V using Tapatalk
At the risk of interrupting the thread anymore than I already have, what dealer did you buy from? Any suggestions? Is 80# enough for 19' nitro on ky lake?
Call Brian. Best price you will find.Quote:
Originally Posted by blue-jig
bbgmarine
What Cray said x3Quote:
Originally Posted by cray
X4! You can go to the MinnKota website. They have a calculator to figure the thrust you need, which relates to boat weight and length.Quote:
Originally Posted by cray
At least the 80
X5 call Brian no connection with me just like good prices & serviceQuote:
Originally Posted by Redge
There is a post from Brian on the member sponsored classified with close out deals on these motors. Great guy to talk too. I ordered a motor from him earlier this week.
Sent from my iPad using Tapatalk
Get the new Terrova with ipilot. It has the new spot lock that keeps you a lot closer to the spot you mark.