Anchor system configuration, setup, and use

My Anchor Setup is currently just a 12# Danford with 150' of rope (rode is the fancy word) just tied to a rib of the boat.
I just feed the rode into a 5gal bucket on the deck for storage and lay the anchor between the forward bulkhead and the 5gal bucket.
When the Anchor is deployed I just tie it off to the starboard bow cleat.

Based on readings this is not ideal for many reasons and makes for a potentially dangerous condition because the anchor/bucket is loose and able to fly around in the event of an accident.

I'm looking at a few different options for holding the rode while anchored.
I can't be the only person who's had these questions but I've not been able to find pictures or explanations online that match what I'm looking for.

Right now the thought is to extend my foredeck with plywood to make an enclosure for the 5 gal bucket AND give a storage locker door on the deck to put the anchor in. In addition adding an anchor pulley ATTWOOD Lift'N Lock Anchor Control | West Marine

Will the pulley hold the rode or do I still need to tie it off to a cleat/quick pull type cleat?

Anchor setup
http://www.crappie.com/crappie/attac...6&d=1465865406

Bow View
http://www.crappie.com/crappie/attac...0&d=1465865439

Would like to duplicate the setup on the stern..likely on the Starboard side away from the sonar
Stern View
http://www.crappie.com/crappie/attac...3&d=1465865383

Thanks in advance.
jer

I use these on my boat.:twocents
WORTH COMPANY Anchormate Reel - Walmart.com


https://www.youtube.com/watch?v=rU8bIbmfX_M
http://i5.walmartimages.com/asr/6850...0&odnBg=FFFFFF

do you have a pic if it installed on your vessel both in storage mode, and such.

I always use a jam cleat to secure the anchor line, as it can be quickly disengaged even if the line is under pressure, which would prevent me from taking it off a regular cleat. I also tie a float to the other end of the anchor line, so if I do have to jettison the anchor for any reason I can go back to the area and retrieve the whole assembly. The float only has to keep the end of the line afloat. I actually use an old fender for my float.

I keep my anchor, chain and rode in a big soft cooler bag I picked up at BJ's wholesale club. And it is a danforth with 16' of chain and 200' rope and easily fits in and stays neat.

One of these
California Innovations 12 Gallon Mega Tote - BJs Wholesale Club

I use one of these on two boats and they work fantastically well for us. Easy to use. Easy to keep confined and tangle free lines.

HDX 150 ft. 16/3 Cord Storage Reel-HD-130PDQ - The Home Depot

I use a similar anchor, but a slip ring style. Unclear if that is the kind you have. Just add a 4' length of heavy chain to the anchor and then tie it on your main line. I've never lost an anchor to a stump with a slip ring. :)

Thank you folks.

Quote:

---

Originally Posted by Pomoxis

do you have a pic if it installed on your vessel both in storage mode, and such.

---

Here is how some people have installed their anchormates.

https://www.google.com/search?q=anch...lation+on+boat

Pomoxis,I have the lift n lock like the link you posted and I do like it. I saw em at gander mom this week for $10.00 . The weak point is the plastic roller, I've replaced mine with an aluminum roller. My rope, I roll it up on a spool. I also have a boat that has the an ornate on it but have never used it( project boat). I'll post up a pic of mine later

Quote:

---

Originally Posted by bearclaw

Pomoxis,I have the lift n lock like the link you posted and I do like it. I saw em at gander mom this week for $10.00 . The weak point is the plastic roller, I've replaced mine with an aluminum roller. My rope, I roll it up on a spool. I also have a boat that has the an ornate on it but have never used it( project boat). I'll post up a pic of mine later

---

Here is a couple pics of mine,I don't have but about 40ft of anchor rope on this spool. I have some Velcro on the bottom of the spool and floor of the boat,I just stick the spool down on it an it stays putAttachment 244391heres the back,you can see where I changed out the plastic wheel yo an aluminum, I've broke a couple of the plastic wheels by bumping into the dock and suchAttachment 244392