Attachment 243918
The transducer is 8" in length. The only possibility I see is drilling a hole in the skeg. Anyone have a better idea?
Printable View
Attachment 243918
The transducer is 8" in length. The only possibility I see is drilling a hole in the skeg. Anyone have a better idea?
Check out transducer shield & saver. They may have a bracket that lets it work.
Sent from my iPhone using Tapatalk
That's a darn good idea, they make some great products.Quote:
Originally Posted by deltabound
You may want to check these out also.
da 'ducer apparatus® - Podunk (po dungk) A small isolated town, region, or place that is regarded as unimportant. . . .
...that they have anything that fits my transducer, and the cost for the closest thing 1s $159.Quote:
Originally Posted by deltabound
the "DA-DUCER" dvice will work with ANY 'ducer
X2!Quote:
Originally Posted by wannabe fisherman
Ok guys I am in a pickle I purchased a Raymarine Dragonfly 7 Pro and a trolling motor mount but it won't fit my Minn Kota Edge 45 skeg is in the back and the Transducer is to long... Did anyone come up with a solution yet?
https://uploads.tapatalk-cdn.com/201...a39527be0a.jpg
Sent from my iPad using Tapatalk
I've seen some guys notch the skeg to allow the xducer to slide forward to miss the prop ...
Rickie
Quote:
Originally Posted by Possum01
Minn-Kota says it will not invalidate warranty to drill a hole in the skeg. Bolt, nut, washers, hard rubber spacer, and a number of washers cut from an old inner tube. Works fine.
Problem solved for me on mounting a Raymarine Dragonfly 7 Pro Transducer on Minn Kota Edge 45...
Thanks to Bryan at RayMarine he put me in touch with the fine folks at Transducer Shield and Saver which happen to be 40 miles south of me... I purchased a TSS-RM-2 a side mount plate SM-Plate-T plus straps... instead of shipping I made a quick trip there and the great ladies at TS&S showed me how to mount the unit... Now I am up and running... https://uploads.tapatalk-cdn.com/201...773b79304d.jpg
https://uploads.tapatalk-cdn.com/201...7693ce8459.jpg
Sent from my iPhone using Tapatalk
What about prop wash effect scan???Quote:
Originally Posted by rnvinc
Sent from my iPhone using Crappie.com Fishing mobile app
Please send links to all possible solutions
My wife gave me the go ahead for my 2nd dragonfly 7 for trolling motor The 1st is transom mount. Love itAttachment 278634
Sent from my iPhone using Crappie.com Fishing mobile app
No problem in signal wit fin or prop wash?Quote:
Originally Posted by Possum01
Sent from my iPhone using Crappie.com Fishing mobile app
No noticeable issue with signal due to fin... Dragonfly Pro is a down image unit so I have not had any problems with it.
Attachment 278947Attachment 278948
Sent from my iPad using Tapatalk
I did a simular fix by drillng fin and grinding down one ear that screw goes through it fits flush against fin and botton of fin rest on ducerQuote:
Originally Posted by wes75951
will send pictures post flu
Attachment 290464Attachment 290465
Sent from my iPhone using Crappie.com Fishing mobile app
Hit sizable submerged log. Held up fineQuote:
Originally Posted by chippo
Sent from my iPhone using Crappie.com Fishing mobile app