Line?

If I go from 6# to 4 will I be able to cast 1/64 oz jig farther?

Yes.

Also, most lines are mislabeled. They are stronger than what the package says. Most "4-pound" lines break at around 6# of pressure.

After years of changing line and wasting line,I've settled on 4lb test for everything I fish for except channel cat.

Yes, depending on where you fish and what other type of fish you might hook, you could even try 2lb test.

I switched to 4 lb. after and not having any issues with 1.5 lb. crappie on bay springs . Figured bream would pose no threat . Only time I have doubt is breaking it tying knots . Catch rate will go up . :fish jmo.

4lb test casts very well and will handle fish if you excersize caution during the fight and hook sets

One more thing on this - with 4lb and 2lb test retie often. Any knick or abrasion is bad news. I've landed large bass with 4lb test and it's not hard to do as long as the line is good shape. There are plenty of other times I knew I should retie and didn't, and loose a big fish.

Set your drag light and give it a shot. I've been using 4lb for over 20 years.

The simple answer is yes. But a lot of it has to do with the rod you are using. A heavier action might warrant some concern. If you stick to UL crappie/panfish rods, you should be fine.

If you are fishing brush or heavy cover, consider a light braid (i.e.: 2# test) with a 4' fluorocarbon leader rated for 4# test. You'll increase your casting distance and the fluorocarbon will afford good abrasion resistance. Fluoro stretches also, which will help as a shock absorber with braided lines. A lot of it has to do with what gives you the most confidence.

Yes and No - depends but like Crestliner said rod could cause problems. Reel with a long spool helps.

Are you only casting the jig?? or a slip bobber rig??

Had something hit my 4# line this morning like a banjo string...I'm guess a bass


Sent from my iPhone using Tapatalk

Jest jig if I try use slip float the jig is so light it won't pull the line through the float to the stop