It's not that old..
Makes 2nd unit on front that has died.....
[emoji35]
Makes me want to quit Lowrance
Sent from my GT-I9515L using Tapatalk
Printable View
It's not that old..
Makes 2nd unit on front that has died.....
[emoji35]
Makes me want to quit Lowrance
Sent from my GT-I9515L using Tapatalk
Sometimes weird unit problems can be attributed to a bad battery or bad wiring to the battery ...
You might troubleshoot thru power related possible issues ...
Or test the unit on someone else's boat to verify ...
Rickie
DidQuote:
Originally Posted by rnvinc
It's dead
Sent from my GT-I9515L using Tapatalk
Yeah I'm starting to question Lowrance myself. I'm not happy with the 2 I have now. I think a year and a half old. I talked to them and they told me to do a restart. That has done nothing but made it worse.
Called them today
275 bucks ...
DARNIT
Sent from my GT-I9515L using Tapatalk
Aluminum semi-v boat + rough water = lots of vibration up front. Have you thought about using rubber isolation mounts?
I have ram mountsQuote:
Originally Posted by Mountain Fork
Sent from my GT-I9515L using Tapatalk
Two units being bad in one place sounds more to me like an issue with the location than it does with the unit. I too have RAM mounts but, like anything else, they take a beating up front. Again, I'm not sure of where yours is mounted, what type of boat you have, what water you fish and so on, but I suspect that no matter what unit you put up there you might have a similar issue.
The issue might not be while you are fishing. The issue might be while you are trailering your boat to and from the ramp. Another issue that I have seen is extreme cold weather, hot weather, or extreme changes. Living in Northern Michigan and keeping ones boat in a garage is okay... right up until you head down the road and it is 17 degrees outside. Electronics don't like that quick of a change in temperature. As a computer specialist for the government, the issue here can be simple but figuring it out can be difficult. I'll throw a couple of questions out there for you however... many minds might come up with something you did not think of.
You say this is the second unit (Lowrance). When you changed them out, did you also change out all of the wiring that went to it. I.E, did you utilize a new power cord or keep the old one in place? Did you change the in-line fuse? Is there an in-line fuse? Are all the wiring connections properly water sealed? I would say there is a common variable here and my suspicion is that it is not the unit itself. I own 7 HDS Gen 2 models in every size they make and have not had one issue with any of them. Not saying you didn't get the "two bad apples" just saying that I would think that there is another issue causing the problem.
22 ft flatbottom
8 ft beam
Rides like a 2 ton log wagon
Sent from my GT-I9515L using Tapatalk
Off season (hunting )
I remove front unit.
Boat stays in enclosed garage 100% of the time
Boat is a rough riding SOB for sure
Sent from my GT-I9515L using Tapatalk
Ah yes.. the Lumber Wagon!
We both be on to something. Me being that she is hammering the device pretty hard, and you with the fact that that particular model might have some piece in some tiny little spot that is not conducive to said named lumber wagon rides!
In this situation I would call Lowrance and ask to speak to a head tech,not the general phone guys and discuss it with them.2 units going bad on the same boat is unusual.