Any suggestions how to install these small split rings? My pliers are too large. I'm using the KVD small pliers.
Printable View
Any suggestions how to install these small split rings? My pliers are too large. I'm using the KVD small pliers.
Barlow's tackle has a good one. I use this one for all rings:
Premium Split Ring Pliers
This one caught my eye though for the very small ones as the premium can be a bit awkward but doable:
Split Ring Pliers - Narrow Opening
I have a couple of pairs of the old cheap Worth split ring pliers and I like them but I got a pair of the Texas Tackle split ring pliers and I really like them
http://i218.photobucket.com/albums/c...ringpliers.jpg
http://i218.photobucket.com/albums/c...ringpliers.jpg
Xuron is what I use and most the pros. Works great on size 0. I have a pair with the nose filed down for smaller than 0. This is a good price. Split Ring Pliers Xuron 496 Jump Rings Opening Plier Jewelry Wire Bead Working | eBay
Attachment 226825
Agree with Barlow's as a good place to look as they have several different pair for different size rings. Is where I bought my few pair! I didn't look at these links, just know Barlow's Tackle!Quote:
Originally Posted by barefoot
Skip
I have a pair of older pliers I ground the tip down on that work pretty good because I am used to using them. Last time someone posted these Xuron pliers I ordered a set. Pretty nice and this ebay link is definatley the place to buy.Quote:
Originally Posted by ifish
thanks i have some high end split ring pliers but not usable on the tiny ones.been using a tiny pocket knife to open then and have the scars to prove itQuote:
Originally Posted by barefoot
I use the edge of the blade and feed the end into the hole. That allows a large enough gap to feed onto the crane swivel and use a pair of hemos to complete it. That is if I even use split rings. The last couple years I use jewelry rings and just crimp them tight, less hassle.
I ground the tip down to fit the #0 split rings.
may have to try that
I use pocket knife with the blade just right to open the "o" ring and slide swivel and blade in at the same time then use pliars to move them around.....just ordered 3000 rings so I will be doing this a bunch but have got good at doing it this way.....works for me. The small rings are the best.....