Pulling cranks with Southern Crappie Rods?

I'm in the market to upgrade my rods and need some advice. While I realize no single rod can do EVERYTHING, I'm looking for a good "overall" rod that can be used for a couple different types of fishing. I usually longline cranks and occasionally jigs, but have recently tried my hand at spider rigging. I've been seriously mulling over buying some Southern Crappie Rods, mainly because they're supposed to be a great choice for strength vs. sensitivity (especially for spider rigging situations). My only question is if they can hold up to pulling 300 Bandits at 1.5+ mph? Or maybe I would be better off going with something like the BnM Pro Staff Trolling rod? Or maybe another rod I'm not familiar with? And advice or suggestions??

I really like my pst's for pulling cranks. They are 16' and do a good job pulling cranks. I bought some firecast rods for my shorter rods and they do a fine job also.

I have PST's and 2 sets of Southern Crappie. For pulling cranks and occasional spider rigging would go with the PST. Southern's are great tough rod but designed for 1/2 oz weight specifically for spider riging.

I used my 14 foot Southern Crappie rods in my line up this summer pulling cranks and they did fine, they bend some but handle a fish well.

I run 12 and 14" Southern Crappie rods next to a 16" Capps and Coleman and the bend is exactly the same. I run a lot of BIG cranks, much bigger than 300 Bandits, and the Southern rods handle them well. Bend in the rod doesn't affect the action of the bait.

What mrdux said. I also pull cranks with 14' Southern Crappie rods and they do great. They work well long lining jigs as well but I ain't never spider rigged so I don't know about that.

My rods are 12, 14 and 16 FEET long. Used inch instead of foot in original reply.

I have Southern Crappie rods from 6 thru 14 foot.

Well as I was JUST about to buy some PST poles, I think you guys may have talked me into the Southern Crappies. I've heard too much good stuff about those, so I'm wanting some bad anyway. Don't think you can go wrong with either! Thanks so much for the good advice! I LOVE this site!! :biggrin

Never having owned any southern crappie rods I can't speak for them at all. I have BnM BGJP's and do everything you spoke of with them. 300 Bandits and 255's that I hand paint, jigs and spider rig is all done with mine. For trolling cranks I have to say that the longest ones I have are 12' so I can't speak of the longer versions either. I will say that the stiffer Wally Marshall rods I have lose more fish than any of the other softer action rods. That said, some flex is a plus in keeping fish buttoned up. My spread for pulling 12's, 10's, 8's and some stiffer 6' rods which I also separate by varying the length of line out. Works good for me, get an occasional tangle but the spread and the rods work good for me.

When you talk to Ed..Ask him about the new trolling rod he is coming out with. You might really like them

I also have used my 14 Southern pulling cranks at 1.8 mph and landed a 24" walleye no problems no issues I have a 12'er that works great too

Call Ed, new rods coming out very soon. I have seen them hold two ounce weights, no problem at all.

Hard to beat the BnM Pro Staff PST. I run a 14ft PST(Neon tip) in the front with 2oz weight followed by 16ft PST, 12PST, and 8ft PST(Neon Tips) all long lined out the back with 4ft line separation. I use the same setup minus the 2oz weight for long lining 16ft, 14ft, 12ft, 8ft PST. The PST are also great for tight lining for 3/8oz weights and above. You can also buy replacement tips from BnM, Grizzly has great prices and 3 pole discount as well.