What are my options for a Tmotor for a 16/50 Jon boat? I'd like hand control w/ the spot lock feature.
T.I.A.
Printable View
What are my options for a Tmotor for a 16/50 Jon boat? I'd like hand control w/ the spot lock feature.
T.I.A.
Right now you do not have that option. PDv2- Terrova with Ipilot or MotorguideXi5 all electric steer.
How deep are you fishing. If fishing shallow you could buy a hand anchor stick or make your own.
8'-20'.Any suggestions on making some anchor poles?Where would I get the fiberglass rod?
You might try doing a search on here for shallow water anchors. One fellow posted on building some and had pictures and some part numbers. I do remember him or someone else saying that had found some fiberglass rods fro WWGrainger that they were using. Also saw one made from small heavy wall PVC with about 2 ft of ground rod installed in PVC pipe with the pointed end sticking out about a ft. Some tie off to them and some build and install a ring bracket on side of boat to slip it through. Saw one where a catfish guide in Oklahoma installed several brackets made of Galvanized chain-link fence parts and used conduit and put a t handle on top to push into mud.
Cray Thanks for the suggestions.I hope the tmotor co.'s come out with a hand control with spot lock. Sems I always want something thats not made.lol
you have to have a electric steer to use on spot lock so that when it drifts away 15 feet it will take it back to where it was suppose to be.
It has to be a motor drive version....either a MinnKota power drive or a Terrova or the new Motor Guide one....because it has to have a electric motor to turn it to keep it in position on spot lock.