Is there one I could put in the bow's center seat hole? One that fits in the hole that you put your seat pole in?
Printable View
Is there one I could put in the bow's center seat hole? One that fits in the hole that you put your seat pole in?
A Sportsbrella will fit in a 3/4 in. seat hole
When you get it.....slide the inner or bottom part of pole out....the pointed end is made to stick in the ground.....turn it around and put back together....so you have the necked down flat end to put in seat base. They have them at Academy Sports and also Sam's Club
What they said! Great product!
Ordered me a new one today, got the xl. Old was 4 years old and has been used a lot.
EZ makes and sells a really good umbrella holder for the sportbrella. All his stuff is A-1. His holder would give you the ability to change positions as needed and keep it otw. Just saying it"s not much to pay for the long term benefits.
No, but it will rotate around the pedestal it's mounted on and is made so that it can be adjusted so the brellla is close to the seat or extended to move the brellla out further from the seat. It can also be adjusted up and down. If you're familiar with the sport brellla it also has generous height adjustment capability.
Just make your own. PVC pipe and a few "T" connectors and pipe glue. Made mine for just a few $$$'s. Just slips down over the chair post.
This post just reminded me to go get my sportbrella out of the shed and put it in the boat for tomorrow!! What a luckt break. I would have been cussing when I went to put up some shade and realized I left it at home!
Mine stays in the boat year round, has saved me from a wet tail on more than one occasion
Sure does and the XL doesnt have snaps to hold the flaps up out of the way either.
donated one to the Sardis gods last year about 2/3 of the way up the dam from engineer's pt. about 40 yds off the dam. wind caught it and couldn't turn around fast enough. wondered about going back with my si bird and seeing if it could be spotted.
Second one for me. Feeshes got a shady spot or 12.
Cut a noodle and put on the shaft
Good idea