Printable View
not sure i have the right word on ''pitching'' or not.
i'm swinging jigs under a slip bobber, up to dock posts.
just curious if any of you, use specific rods for this, or if they make
rods just for pitching ?
i've been using a 7' L rod for this, and thought longer should, be better.
so i tried my 8 1/2 foot ML rod, and it was so much easier, and accurate.
so i guess i'll try my 10' ML next. and see how that works.
thx,
That is a accurate description of my main style of fishing. I'm pitching minnows or jigs under slip corks using a 8ft. BnM Ultimate rod. Also got a 8ft. BnM Float-n-Fly that I like to use also. Both are perfectly matched to that style of fishing. IMO
thx for the rods your using, i'll look them up. is a little stiffer rod easier to pitch, what are yours as far as stiffness ?Quote:
Originally Posted by kycreekboy
i love this style of fishing.
i just tried my 10' ML rod.
way to heavy of rod. i can tell now that a lighter rod swings much easier.
I've been playing around with that method as well. I've been using an 8ft BnM BGJP and it seems to work pretty good.
For me, it would depend on how far away from an object I was, as to what length rod I'd use. But, in most cases, at least a 8' rod would be used ... and that would be my BnM Duckworth FnF rod. If I needed the extra length, I'd probably opt to use one of my 10' rods ... either my Sam Heaton or my Huckabee Dipping rod.
You can make the longer rod outfits lighter, by simply using a UL reel ... as long as the reel can be placed on the rod to balance the outfit, which may require having a rod that has a Tenn handle (rather than a fixed reel seat). The reel is mostly a line holder in the case of flipping/pitching a float & jig rig. The longer rod just allows you to reach out a little farther, take up more slack on the hookset, and stay back farther from the object you're fishing around. It may also allow you to set the float/jig down into the water with less "splash" or commotion, if that's necessary.
... cp :kewl
yes, the longer rod lets me pitch farther , easier.
i went with a 3500 series reel to let the line come off real easy, so it will go farther.... but it is heavier.
i'll have to work on the balance now.
thx,
Waaaay too big a reel, IMHO. A wide spool or longcast spool reel in the 1000 series range would do the same thing, and weigh much less !!Quote:
Originally Posted by naturenut
My Mitchell 308x reels are the biggest/heaviest reels I use on my 10' rods. I only use my Shimano Spirex 2000 reel on a 7' Bionic Blade, because I have it spooled with 10/2 PowerPro braid and use it to cast heavier baits.
... cp :kewl
my 1000 series have tiny spools.Quote:
Originally Posted by CrappiePappy
what model 1000 series have the wide or longcast spools.
thx for the info
I pitch with a 12ft slab shaker rod. I love it. I can drop the cork where I want up to 24 ft from the boat. I use it when fishing brush piles and lay downs. When trees are around I use a 9ft 8wt. fly rod.
I fish jig n float a lot. Have a St. Croix Premier 8'6 light moderate that is by far my favorite, paired with a pfluger supreme...... Also have the BnM float n fly 10ft rod paired with a pfluger president that I really like, not quite as nice as the St Croix but def a decent setup to pitch jig n float.
thx for the rod info. i have a couple of the pfluger supremes with a ton of miles on them, love these reels.Quote:
Originally Posted by jeepguyjames
Yes sir..... Big fan of the pfluger spinning reel'sQuote:
Originally Posted by naturenut