IF ONE HAS A HUMMINBIRD 859 DI AND HAS 2 TRANSDUCER SO HE CAN SEE UP FRONT AND SWITCH TO AT BACK ,WHAT SWITCH WOULD HE NEED,AND ANY THING ELSE,THANKS
Printable View
IF ONE HAS A HUMMINBIRD 859 DI AND HAS 2 TRANSDUCER SO HE CAN SEE UP FRONT AND SWITCH TO AT BACK ,WHAT SWITCH WOULD HE NEED,AND ANY THING ELSE,THANKS
I have the same question for a Lowrance HDS 7 touch. Want to run the 2D off my I-Pilot US2 and off the transom when I am running the OB.
This switch is for Humminbird read and make sure it supports your unit.
Humminbird | TS3
Lowrance SB-9BL Part # 46-26 make sure it supports your unit before buying.
http://lowrance.premiumstore.com/details/15030/lowrance-4626.html
Thanks, I will check it out.
The only other part needed than what scrat lists above is a xducer extension cable "If" the 20' xducer cable is not long enough to reach the HB TS3 switch ...
It comes in 10' and 30' lengths ...
Humminbird | EC W10
Humminbird | EC W30
You will have to provide 12v power to the relay ...
Rickie
I found a Q&A on it once y'all gave me the part number. Seems it is 2D only, but that is OK because I get the DI and SI off the LSS2 Transducer.
THANKS GUYS