Had this set up with DriftMasters. Had to take a bolt out of each end to adjust up and down. Got tired of that so got to loking at my spiderLoc's and decided that was the solution. Got another set, removed from Tbar, got with E-Z on drill and tap size, centered base over hole where Diftmasters had been mounted. Drilled and tapped mounting holes and installed on channel. Got it level and bolted down flat. Now the holders can be adjusted individually for pulling cranks,longlining or spiderigging out the back. Plus i have a set mounted on the side that are movable to either side and fore and aft in the Trail.Attachment 203655Attachment 203656Attachment 203657
