Dept chart, added color for yall geezers

If this has been done ...sorry, just goofing off, i just made me one with color , so that at a glance i can get the right number.
Attachment 202160

Thanks!

Thanks MrGoodtimes I am going to copy that and keep it in the boat.:ThumbsUp

Thank you. I like how you have the 100s, 200s, and 300s on the same page. This is much nicer than the three separate ones I have.

What is the rated speed for the chart? Yes, I'm a newbie to crankin'.

I just added color to the one EZ posted long ago. I pull from 1mph up to 2.5 with the chart.

The 300 Chart will work for the Arkie 350,s at 1.7 to 1.8 mph

:biggrin gubers

Quote:

---

Originally Posted by bigcrappiemax

Thank you. I like how you have the 100s, 200s, and 300s on the same page. This is much nicer than the three separate ones I have.

What is the rated speed for the chart? Yes, I'm a newbie to crankin'.

---

Speed doesn't effect depth of a crankbait.

Looks to me you made it where you didn't have to carry your reading glasses, come on fess up you a Geezer in training:Rofl

Quote:

---

Originally Posted by cray

Looks to me you made it where you didn't have to carry your reading glasses, come on fess up you a Geezer in training:Rofl

---

I will admit....i think my arms are getting shorter

I have just spooled up power pro depth hunter braided line 10 pound Diameter...will that chart hold true for my line with 300 bandits? so 95 foot of line out equals 15.4 foot deep?

Quote:

---

Originally Posted by tigerinfielder3

I have just spooled up power pro depth hunter braided line 10 pound Diameter...will that chart hold true for my line with 300 bandits? so 95 foot of line out equals 15.4 foot deep?

---

Thats 95 ft from where your line hits the water

thanks and do yall cast these out as far as you can ? or do you set in rod holder hand cranks off the side and start pulling line out?,,......if i cast them out and my rods will be off the side of the boat do I cast towards the back of the boat or cast straight out the side of the boat?

I dont cast......I just let the line out......I use line counter reels....I let the line out with the rod in the holder the chart distance.....then I estimate line distance from rod tip to where it enters the water and then let out that much more line.

I cast mine, i start with the inside short pole first, after i hook a fish , i cast it back out behind the boat.

Quote:

---

Originally Posted by MrGoodtime

I just added color to the one EZ posted long ago. I pull from 1mph up to 2.5 with the chart.

---

Quote:

---

Originally Posted by "G"

The 300 Chart will work for the Arkie 350,s at 1.7 to 1.8 mph

---

Thank you gentlemen.

Quote:

---

Originally Posted by "G"

I dont cast......I just let the line out......I use line counter reels....I let the line out with the rod in the holder the chart distance.....then I estimate line distance from rod tip to where it enters the water and then let out that much more line.

---

I've seen some clip-on line counters that attach to the rod. Are they any good? Thanks.

Verdict seems to be no.

Not really Randy....accuracy is not good......You can buy Okuma line counter reels at Northwoods Wholsale for 33 bucks Okuma Magda Pro Line Counter MA-15DX

still good info 2 years later.. thanks

Quote:

---

Originally Posted by jordanjones

still good info 2 years later.. thanks

---

Yep, it is. Brought a tear to my eye seeing Mike's screen name pop up, miss him bad to this day and prolly always will. Thanks for bumping this, he would be pleased that even after being gone almost 14 months he is stilling helping someone.
RIP Bro!!!