Printable View
and need some advice regarding transducers. I'm ordering an 899 ci HD SI for the console and an 859 ci HD DI for the bow. Do I need to exchange the transducers for something better? I've been reading that there is an HD upgrade available, but I can't find any reference online in accessories.
i think they come with the good td. better hear it from someone that knows for sure. thats a good set up
PM HBgreg for the lowdown.
Well I read the thread about one H'bird/2 locations and read this:
http://www.crappie.com/crappie/images/icons/icon1.pngParratt, I have the 899 and love it! I bought the model with the standard transducer (I think they all come with the standard) and then I bought the HD transducer for the unit. This way I have two transducers and I put the HD ducer on the stern and one on the bow on my Motorguide TM. Since I do all my scanning while at the yoke I use the HD to my advantage and then when I locate a pile I drop the TM and unplug the unit from the back an move it up front and plug it into a separate set of power and ducer cables. (bought the extra power cable as well for the unit to move up front).
Most people buy the 899 and send in the non HD ducer and exchange it for the HD for a fee of about $90. But to buy the HD out right was only $100 more than just exchanging it so I opted to buy.
Once I get my next unit I may get another 899 or compatible one with the ducer I already have or get another HD ducer. I will wait to see.
Yes it is a lot of work sometimes (you have to get two mounts as well which adds up) but I figure I can handle this until I find some money somewhere!
Hope this helps.
pn sent
I'm hoping Humminbird-Greg will pop in here with some answers....and here's another question: Will my Lakemaster card work in the new units?
The 899 comes stock with the XNT 9 SI 180 T ...which is 455kHz only ...
Upgrading to the XHS 9 HDSI 180 T will add the 800kHz SI frequency availability ...
------
The 859 DI comes stock with the XNT 9 DI T ... (Transom mount) ...
Which is 200kHz 25° /455kHz 16° 2d cone beams and 455kHz 75° /800kHz 45° DI fan beams ...
It can be traded for the XTM 9 WIDE DI 20 T ... (TM mount) ...
Which is 83kHz 60° /200kHz 20° 2d cone beams and 455kHz 75° /800kHz 45° DI fan beams ...
Some like the narrower 2d cone beams in the XNT 9 DI T for better 2d target separation ...
Some like the wide 2d cone beams of the XTM 9 WIDE DI 20 T for more bottom coverage ...
Rickie
Yes .... The Lakemaster card will work.
I would upgrade the 899 to the HDSI transducer....That will give you 800 Khz capabilities and the 455 Khz scans will be sharper than the stock 899 transducer.
I would also upgrdad the 859 to the DI Wide transducer Humminbird | XTM 9 WIDE DI 20 T
It is designed for the trolling motor and has the 83/200 2D which will give you better 2D coverage area.
OOPS ... Rickie typed faster.....
Yes...except for Helix which takes the micro SD Card size mapping card ...Quote:
Originally Posted by vic n
I think the new LakeMaster card version will be micro SD Card (with SD Card adapter) ...
Rickie
It's a group effort Bob ...
:ThumbsUp
Rickie
If you add the wide DI to the 859 will the 83khz even work since the unit only drives the standard transducer at 200/455khz 2d? Is there a transducer selection on that unit that includes the 83khz?Quote:
I would also upgrdad the 859 to the DI Wide transducer Humminbird | XTM 9 WIDE DI 20 T
It is designed for the trolling motor and has the 83/200 2D which will give you better 2D coverage area.
Thanks all! Just the info I needed. Now I can get these swaps made before the big install!
Yes ... There is a "Transducer Select" menu choice for DI 200kHz/83kHz in the 859 DI, 959 DI, 1159 DI models ...Quote:
Originally Posted by matzilla
(The DI 200kHz/83kHz selection was also added to the 858 DI, 958 DI, 1158 DI in a previous software version) ...
Rickie
Yes it uses the 200/83 ..... I don't have that unit, so I don't know what the menu selection is .... I bet Rickie will know:biggrinQuote:
Originally Posted by matzilla
Thanks guys, that's good to know!
Just sent out the transducer yesterday for an exchange on the stock 899 transducer. Cost $85 for the upgrade.
Here ya go BobB:Quote:
Originally Posted by BobB
Attachment 195368
I called the dealership today and ordered both transducers. Boat is scheduled to be built 4/24 and then get rigged, so I should be out in front of the electronics.
Thanks everyone!!
Thanks Greg ..... and co-ordinates to a nice waypoint too :biggrinQuote:
Originally Posted by Humminbird_Greg
That was from the simulator BobB so I don't know how accurate they will be... :dono
but you are welcome to come on down here and try them out!
I've seen that tree 1000 times while I was laying in my couch playing with the settings, lol.