Printable View
I'm mounting the offset driftmaster horizontal rod storage racks in my boat and am wondering which side should I use? Are there any hard and fast do's and don'ts here or just personal preference? Trying not to over-think this. Open to advice from those 'crappie fishers wiser-than- I'.
Are they going to stick out over the side? If so consider any obstructions you might hit when trailering. Narrow roads, brush and mailboxes on passenger side. If mounting toward the inside are they going to obstruct opening lids, steering console things like that. If you will be using every pole you carry in them when fishing you can just loosen the lock nut and turn and lock to clear obstructions.
I too am getting ready to mount a set of home engineered racks into my 2001Crestliner 1750 Fishhawk. One of my questions is how far apart to mount them so as to accomodiate 10' down to 6' rods. I have not settled on the height until the deep freeze is gone and I can spend some time at the boat doing some measuring.
I've decided to mount mine on the driver's (left) side since I enter/exit and approach docks on the right side. I had steel stanchions with 4 inch bases made at a machine shop to mount each rod holder in. I didn't like the driftmaster aluminum threaded bases that were recommended. I'm thinking the threaded aluminum will likely become sloppy over time. To close the gap between the long rod span, I added a third rod holder midway between the first two. This way I get good support for long rods as well as a means to carry my 6-7 ft. rods. I'm stoked to get these things painted and installed.
Post some pics please Sir. Would like to see your set up.
ok will do gobob...didn't you put some holders in your boat in the recent past? thought I read a post about it...? Waiting on a few more pieces yet, then will try my hand at posting a pic, if I can figure it out.
So here's my installation pics. One of my winter projects finally completed. Pretty happy with them. I had the stanchions fabricated at a local machine shop; the rod holders are from Driftmaster. I used three to better support long rods and to have a means to transport my shorter rods. So tired of my rods being propped or lying on the boat deck.:ThumbsUp
Those are nice. Good job.
Looks good to me
thanks.
Nice job
thank u sir. The freed up floor space will make things more manageable and enjoyable, I think. This will have to do until I can upgrade to my dream rig...by the way, is the photo attached to your c.com name a true representation of your likeness?:donojust askin...