Been recording now I put it on hum view and this is what I am getting. My 998 is set at 60 feet on each side but the hummview is set at 250 feet and making it hard to interpret,what can I do to get my pic to be full size in hummview.
Printable View
Been recording now I put it on hum view and this is what I am getting. My 998 is set at 60 feet on each side but the hummview is set at 250 feet and making it hard to interpret,what can I do to get my pic to be full size in hummview.
I'm confused Gene ... I can't make mine do that ...
Right click on the image and check ...:
"Crop from"...set to 0ft
"Crop to"......set to All
Does the entire length of the recording show like that ... ??
Rickie
YES,AND I CAN'T SEE NOTHING TO CHANGE IT,MAY TRY TO RECORD SOMETHING ELSE ON ANOTHER SAN DISK AND SEE WHAT IT DOES. I WAS JUST TESTING IT BEFORE I WENT TO THE PLACE I REALLY WANT TO RECORD,DON'T WANT TO RECORD MY GOOD SPOT TILL I GET BUGS OUT,IT WOULD NOT LET ME CHANGE COLORS EITHER,BUT THAT PART DID NOT MATTER MUCH
Something's odd ... Humviewer will not let you change color Pallette either ...??
When you downloaded Humviewer ... Did you allow it to also download Java ...??
Rickie
Don,t know what is java,got the 2d working when I set to 0ft but SI looks like this now
Rickie,I forgot and left San dish that has a few of my snapshot in unit ,about 7 pic,would that make it load wrong?
Rickie, color is workingsworkings
Snapshots should not affect anything with Humviewer ... That's a completely different folder on the SD Card ...
I'm not sure what's going on Gene ...
I would suggest trying a different SD Card ...
Be sure to not change the SI Range setting during the recording process (set SI Range before starting recording)...
(It is possible to record the Simulator for testing)...
Rickie
Rickie,what it is doing now is showing left side only,can get whole screen but it is just left side? Sorry to keep bro thing u.maybe tomorrow after sleeping on it,thanks
got it rickie,thanks, now lets go to bed,wheee
he still in bed :Rofl
YES RICKIE,JUST GOT UP:Rofl,NOT REALLY.CAN U MARK WAY POINTS ON HUMVIEW,IF SO HOW
Waypoints in Humviewer ...
*Click the "Utilities" button at the top right ...
*From the popup window, click the down arrow to open the hidden tools ...
*Click Create Waypoint ...(cursor will change to a red + )...
*Click on the image where you want the waypoint ...(edit waypoint popup should show) ...
*Edit waypoint
*Click OK ...
-----------
-----------
Exporting waypoints out of Humviewer ...:
*Click File in upper left ...
*Click Export ...(save window will open)...
*Input into "Save In" somewhere you will remember ...
*Input into "File Name" something you will remember ...
*Change "Files of Type" to "Humminbird files (*.gpx) ...
*Click "Save" ...
*What to include popup will show ...make your selections (usually just waypoints)...
*Click OK ... (Data saved successfully popup should show) ...
*Click OK ...
-------------
-------------
Getting the Humviewer waypoints into HBPC ...:
*Open HBPC ...
*Click File in upper left ...
*Click Open ...
*Navigate to the .gpx file that was exported from Humviewer ...
*Open the .gpx file in HBPC ...(file should list in left pane of HBPC) ...
*Click "+" to the left of the file name...
*Click "Waypoints" ... (Verify waypoints made in Humviewer show up in right pane of HBPC) ...
*Insert SD Card into PC Card reader ... (SD Card icon should now show in left pane of HBPC) ...
*Left click on waypoint imported file name to highlight the file blue ...
*Click "Green Up Arrow" (Upload from PC to SD/MMC) ...
*From popup window choose "Replace" ...
*From continue popup choose "Yes" ...
*Upload successful popup should show ...
*Click "Red Eject Arrow" under SD Card icon ...
*From continue popup choose "Yes"...
-------------
-------------
Loading waypoints into HB unit ...
*Power on unit ...
*Insert SD Card with new waypoints ...
*Follow prompts on unit screen ...
Rickie
Were you able to make another recording on a different SD Card ...??
Rickie
RICKIE,BAD WEATHER HERE,BE A WHILE BEFORE I CAN GO NOW,DOCTORS SEEMS TO LOVE ME:RoflOR MY MONEY:dono.I SURE WANT TO THANK YOU FOR ALL THIS HELP,THANKS
RICKIE, CAN U CHANGE THE CLARITY IN THE UNIT,WHEN I HIT BRIGHTNESS IT DO NOT SEEM TO DO ANYTHING,OR DO ALL THAT HAVE TO BE ADJUSTED IN SI UNIT?
YES
When you change brightness or contrast ... Are you clicking the "Activate" button ...??
Rickie
I FUND OUT THAT THE ACTIVE BUTTON IS HID UNDER THE PIC,DON'T KNOW HOW TO MOVE PIC UP A LITTLE
BEEN GONE,WILL TRY THAT,THANKS