Does anyone know anybody that will come to your camp to repair an RV refrigerator in the Duck Hill area?
Printable View
Does anyone know anybody that will come to your camp to repair an RV refrigerator in the Duck Hill area?
Plug it up gewber
I did, my fridge only works on gas when you switch to electric it stops cooling.
Sounds like the electric element is burned out. Get the brand name, model number and serial number. Remove the old element, take it to a supply house and match it up.
Did you get the frige working. Update us, Please.
Well I took it to camper place they plugged it up and it worked ptoperlyQuote:
Originally Posted by canebreaker
So I took it back to camp where it worked until last week now I'm back to gas only again
Sound like you have electrical problem in your camper
The electronic boards are bad about needing to be reset. The last time mine quit working right I simply turned it off for a day and it reset itself. Are you getting a blinking light error message? If so the number of times your power light blinks will tell you what your problem is.
Now Scott, mine don't have that.
I spent a week trying to find a problem with mine. Took out the power converter, checked all the fuses and breakers. The power was out in the galley. A friend of mine came by, went in to bathroom, pushed the red button on a ground fault receptacle and that was all it was. Live and learn, he said, as he walked out the door.
Reese, I think that may be the case this time on mine. I'm not getting any error lights, but I think the power may have blinked at the camp since I was there 2 weeks ago and maybe all it needed was to be reset.
But I'm going to take cane breakers advice and get a new element to put in it when I go back.
Satdoc1, if I have an electrical problem with the camper, the electrician didn't find anything.
"power may have blinked at the camp"
The power went out on us for maybe 10 seconds while camping. I have a check light with button on the frig that came on. My on off button is for elect and gas. In for elect, out for gas. Push it to off and then to on and push the check button.
To run on electricity your 12 volt signal from inverter must be working.